How to remove the crankshaft pulley and front Crankshaft Seal in V6 engine on Ford Mustang?

To remove the crankshaft pulley, 4.0L can be unbolted while using a bolt type puller while 3.7L can be removed using a 3- jaw puller. Start by removing the first connection of the battery before you can remove the drive belt and the engine cooling fan/shroud. Lift the car properly and support it on jack stands, you then can remove the mounting bolts of the power steering fluid cooler and set it apart and not take off the fluid lines. It is followed by the crankshaft pulley bolt's removal together with a centre bolt using a socket and a breaker bar, the centre bolt being thrown away and replaced by a new one. Cinch the pulley in an immovable position by using a strap or a chain wrench; putting a shop rag on the pullery before using the tool. To eliminate the pulley of your vehicle, you should utilize a puller and if an adapter is required in this case, you ought not to harm the crankshaft threads. Using a seal puller, to extract the crankshaft front oil seal and ensure not causing damage on the crankshaft or seal bore, after the pulley has been removed. Clean the seal bore gently and look for rough edges, etc, while inspecting the hub zone for fatigue or scoring, where a repair sleeve may be considered. To install, clean engine oil is applied on the lip of the new seal and driven into the bore with a socket or pipe slightly smaller in diameter than the seal with the open side facing inward the engine. Putting some clean engine oil to the sealing surface of the hub, then put the crankshaft pulley/damper through using the special installation tool and can't use hammer. Replace with a new center bolt and torque it to the needed level, others installing process would be done in a reverse order to the previous process.

Genuine Ford Mustang Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

33 Crankshaft Pulleys found

View related parts
Ford Mustang Crankshaft Pulley
Part Number: 3L2Z-6B321-AA
$142.61 MSRP: $246.67
You Save: $104.06 (43%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft
- Manufacturer Note: When Removing Damper, It Is Mandatory To Replace 6A340 Attaching Bolt
- Replaced by: 8L2Z-6B321-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Mustang | 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission 5R55S, 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Crankshaft Pulley
Part Number: XR3Z-6B321-AA
$332.22 MSRP: $490.00
You Save: $157.78 (33%)
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft; Damper & Pulley, Vibration Damper
- Manufacturer Note: Includes pulley,damper and pulse ring. For engine tags AK-530/531-AA, SK-530/531-AA, KK-530/531-AA only.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Ford Mustang | 6 Cyl 3.8L | 4AT 4R70W, 5MT
View related parts
Ford Mustang Crankshaft Pulley
Part Number: 8L2Z-6B321-A
$162.80 MSRP: $246.67
You Save: $83.87 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft
- Manufacturer Note: When Removing Damper, It Is Mandatory To Replace 6A340 Attaching Bolt
- Replaced by: 8L2Z-6B321-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford Mustang | 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission 5R55S, 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Crankshaft Pulley
Part Number: CJ5Z-6312-A
$169.86 MSRP: $248.33
You Save: $78.47 (32%)
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft; Pulley
- Replaced by: NJ5Z-6312-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2019 Ford Mustang | 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Crankshaft Pulley
Part Number: E4TZ-6316-A
$118.56 MSRP: $173.33
You Save: $54.77 (32%)
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft; Damper, Vibration Damper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1995 Ford Mustang | 8 Cyl 5.0L | 3AT C3, 3AT C5, 4AT A4LD, 4AT AOD, 4AT AOD-E, 4MT, 5MT
View related parts
Ford Mustang Crankshaft Pulley
Part Number: GR3Z-6312-B
$104.77 MSRP: $153.17
You Save: $48.40 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft; Vibration Damper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2020 Ford Mustang | 8 Cyl 5.2 L GAS, 8 Cyl 5.2L | 10-Speed Automatic Transmission (10R80), 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Crankshaft Pulley
Part Number: HL3Z-6312-A
$75.49 MSRP: $137.50
You Save: $62.01 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft; Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2019 Ford Mustang | 6 Cyl 3.7L PFI NA | 10-Speed Automatic Transmission (10R80), 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang PULLEY - CRANKSHAFT
Part Number: NR3Z-6312-A
$124.26 MSRP: $181.67
You Save: $57.41 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Pulley, Pulley
- Replaces: KR3Z-6312-B, JR3Z-6312-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Mustang | 8 Cyl 5.0 L GAS, 8 Cyl 5.0L DOHC EFI Modular, 8 Cyl 5.0L MOD DOHC SEFI NA | 10-Speed Automatic Transmission (10R80), 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang PULLEY - CRANKSHAFT
Part Number: NJ5Z-6312-A
$169.86 MSRP: $248.33
You Save: $78.47 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Pulley, Pulley, Vibration Damper
- Replaces: CJ5Z-6312-F, CJ5Z-6312-C, CJ5Z-6312-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023 Ford Mustang | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Crankshaft Pulley
Part Number: BR3Z-6312-B
$136.80 MSRP: $200.00
You Save: $63.20 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft
- Replaced by: BR3Z-6312-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford Mustang | 6 Cyl 3.7L PFI NA | 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang PULLEY - CRANKSHAFT
Part Number: KR3Z-6312-C
$598.08 MSRP: $890.00
You Save: $291.92 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Pulley, Vibration Damper
- Replaces: KR3Z-6312-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Mustang | 8 Cyl 5.2 L GAS
View related parts
Ford Mustang PULLEY - CRANKSHAFT
Part Number: P2GZ-6312-A
$100.66 MSRP: $147.17
You Save: $46.51 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024 Ford Mustang | 4 Cyl 2.3 L GAS
View related parts
Ford Mustang Crankshaft Pulley
Part Number: JR3Z-6312-A
$124.26 MSRP: $181.67
You Save: $57.41 (32%)
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft
- Replaced by: NR3Z-6312-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2019 Ford Mustang | 8 Cyl 5.0L DOHC EFI Modular, 8 Cyl 5.0L MOD DOHC SEFI NA | 10-Speed Automatic Transmission (10R80), 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Crankshaft Pulley
Part Number: 4R3Z-6312-BA
$85.39 MSRP: $124.83
You Save: $39.44 (32%)
Product Specifications
- Other Name: Pulley - Crankshaft
- Replaced by: 4R3Z-6312-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Ford Mustang | 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.8L DOHC SC | 5-Speed Automatic Transmission 5R55S, 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Vibration Damper
Part Number: 1W7Z-6312-AA
$0.00
Product Specifications
- Other Name: Pulley - Crankshaft; Crankshaft Pulley, Pulley
- Replaces: 1W7Z-6312-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Mustang | 8 Cyl 4.6L SOHC EFI | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 5-Speed Manual Transmission (T450D), 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission Tremec T56, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Harmonic Balancer Pulley
Part Number: F3AZ-6316-A
$0.00
Product Specifications
- Other Name: Damper Assy; Damper Assembly, Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1998 Ford Mustang | 8 Cyl 4.6L | 4AT 4R70W, 5MT
View related parts
Ford Mustang Crankshaft Pulley
Part Number: FR3Z-6312-A
$0.00
Product Specifications
- Other Name: Pulley - Crankshaft; Vibration Damper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Mustang | 8 Cyl 5.0 L GAS
- 2015-2017 Ford Mustang | 8 Cyl 5.0L MOD DOHC SEFI NA | 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Crankshaft Pulley
Part Number: 4R3Z-6312-A
$85.39 MSRP: $124.83
You Save: $39.44 (32%)
Product Specifications
- Other Name: Pulley - Crankshaft; Pulley, Vibration Damper
- Replaces: 4R3Z-6312-BA, 8R3Z-6312-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford Mustang | 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.8L DOHC SC | 5-Speed Automatic Transmission 5R55S, 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Crankshaft Pulley
Part Number: 8R3Z-6312-C
$85.39 MSRP: $124.83
You Save: $39.44 (32%)
Product Specifications
- Other Name: Pulley - Crankshaft
- Replaced by: 4R3Z-6312-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Mustang | 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.8L DOHC SC | 5-Speed Automatic Transmission 5R55S, 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Crankshaft Pulley
Part Number: DR3Z-6312-A
$0.00
Product Specifications
- Other Name: Pulley - Crankshaft; Pulley
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford Mustang | 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.8L DOHC SC | 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

| Page 1 of 2 |Next >

1-20 of 33 Results

Ford Mustang Crankshaft Pulley

In the Ford Mustang vehicles, the Performance Crankshaft Pulley plays the function of an effective power transfer from the engine towards other parts consist of the power steering pump, A/C compressor, and alternator. Being directly connected to the crankshaft through the engine, the Performance Crankshaft Pulley improves the experience of torque in all the engines. Also, it acts as an alternator, to absorb engine vibrations in an attempt to balance the engines for efficiency. Annual models of Ford Mustang have, therefore, incorporated different Performance Crankshaft Pulley to suit the performance standards of the specific models. These pulleys may be made of different materials, and their weights may vary, thus, these changes in the design, shape and size of the pulleys affect the decrement of the rotational mass as well as the efficiency of the throttle response. The use of the Performance Crankshaft Pulley indicates improvements made in the crankshaft of engineering for the objective of enhancing the features of the Ford Mustang.

We provide a wide range of Ford Mustang Crankshaft Pulley at the best prices possible. If you need Ford Mustang Crankshaft Pulley, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Mustang Crankshaft Pulley Parts Questions & Experts Answers

Crankshaft Pulley
8L2Z-6B321-A
Q: How to remove the crankshaft pulley and front Crankshaft Seal in V6 engine on Ford Mustang?
A: To remove the crankshaft pulley, 4.0L can be unbolted while using a bolt type puller while 3.7L can be removed using a 3- jaw puller. Start by removing the first connection of the battery before you can remove the drive belt and the engine cooling fan/shroud. Lift the car properly and support it on jack stands, you then can remove the mounting bolts of the power steering fluid cooler and set it apart and not take off the fluid lines. It is followed by the crankshaft pulley bolt's removal together with a centre bolt using a socket and a breaker bar, the centre bolt being thrown away and replaced by a new one. Cinch the pulley in an immovable position by using a strap or a chain wrench; putting a shop rag on the pullery before using the tool. To eliminate the pulley of your vehicle, you should utilize a puller and if an adapter is required in this case, you ought not to harm the crankshaft threads. Using a seal puller, to extract the crankshaft front oil seal and ensure not causing damage on the crankshaft or seal bore, after the pulley has been removed. Clean the seal bore gently and look for rough edges, etc, while inspecting the hub zone for fatigue or scoring, where a repair sleeve may be considered. To install, clean engine oil is applied on the lip of the new seal and driven into the bore with a socket or pipe slightly smaller in diameter than the seal with the open side facing inward the engine. Putting some clean engine oil to the sealing surface of the hub, then put the crankshaft pulley/damper through using the special installation tool and can't use hammer. Replace with a new center bolt and torque it to the needed level, others installing process would be done in a reverse order to the previous process.

Related Ford Mustang Parts

Browse by Year