How do you remove and install the ignition switch and key lock cylinder on Ford Mustang?

Remove the ' minus' end of the cable from the battery. Disconnect lower steering column cover. To unlock the reduction gears from the lock cylinder housing, press on the two release tab and pull the ignition switch out. Pull out the electrical connector by operating the release tab from the ignition switch. It is the process where by the components that had been assembled are disassembled. Pull out the Passive Anti-Theft System transceiver by pulling the head of the screw backward on the retaining tabs located in the lugs on the lock cylinder housing. Depress the lock button on the lower left of the Ignition Lock Cylinder and insert the ignition key into the Ignition Lock Cylinder. By rotating the ignition key you will bring the ignition to the RUN position. To disarm the Ignition Lock Cylinder, push the safety flat blade into the hole that is on the bottom of the Ignition Lock Cylinder, this will release the retaining tab and pull out the lock cylinder. Removal on the other hand is just the opposite of installation.

Genuine Ford Mustang Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Ignition Lock Cylinders found

View related parts
Ford Mustang Cylinder Ignition
Part Number: AU5Z-11582-B
$70.02 MSRP: $130.73
You Save: $60.71 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: SW-6845, SW-6606, SW-6149, 5F9Z-11582-BA, 4L3Z-11582-BB, 7U5Z-11582-B, SW-6390
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford Mustang | 6 Cyl 3.7L PFI NA, 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.0L DOHC EFI Modular, 8 Cyl 5.0L MOD DOHC SEFI NA, 8 Cyl 5.4L DOHC EFI S/C ALUM, 8 Cyl 5.8L DOHC SC | 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
- 2005-2010 Ford Mustang | 6 Cyl 4.0L SOHC EFI, 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.4L DOHC EFI S/C ALUM, 8 Cyl 5.8L DOHC SC | 5-Speed Automatic Transmission 5R55S, 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Cylinder Ignition
Part Number: AU5Z-11582-A
$97.45 MSRP: $133.16
You Save: $35.71 (27%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2013 Ford Mustang | 6 Cyl 3.7L PFI NA, 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.0L DOHC EFI Modular, 8 Cyl 5.0L MOD DOHC SEFI NA, 8 Cyl 5.4L DOHC EFI S/C ALUM, 8 Cyl 5.8L DOHC SC | 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Lock Assembly - Steering
Part Number: 5F9Z-11582-BA
$79.09 MSRP: $130.73
You Save: $51.64 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy - Steering And Ignition
- Replaced by: AU5Z-11582-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford Mustang | 6 Cyl 4.0L SOHC EFI, 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.4L DOHC EFI S/C ALUM, 8 Cyl 5.8L DOHC SC | 5-Speed Automatic Transmission 5R55S, 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Lock Assembly - Steering And Ignition
Part Number: AA8Z-3F527-A
$131.04 MSRP: $195.00
You Save: $63.96 (33%)
ADD TO CART
Product Specifications
- Replaces: 5F9Z-3F527-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2014 Ford Mustang | 6 Cyl 3.7L PFI NA, 6 Cyl 4.0L SOHC EFI, 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.0L DOHC EFI Modular, 8 Cyl 5.0L MOD DOHC SEFI NA, 8 Cyl 5.4L DOHC EFI S/C ALUM, 8 Cyl 5.8L DOHC SC | 5-Speed Automatic Transmission 5R55S, 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Lock Assembly - Steering
Part Number: 5F9Z-3F527-A
$131.04 MSRP: $195.00
You Save: $63.96 (33%)
ADD TO CART
Product Specifications
- Other Name: Lock Assy - Steering And Ignition
- Replaced by: AA8Z-3F527-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Ford Mustang | 6 Cyl 4.0L SOHC EFI, 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.4L DOHC EFI S/C ALUM, 8 Cyl 5.8L DOHC SC | 5-Speed Automatic Transmission 5R55S, 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Lock Cylinder With Keys
Part Number: E3DZ-11582-A
Product Specifications
- Other Name: Cylinder & Key, Ignition Lock Cylinder
- Replaces: E9TZ-11582-A, E3AZ-11582-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1981-1993 Ford Mustang | 4 Cyl 2.3L, 6 Cyl 3.3L, 6 Cyl 3.8L, 8 Cyl 4.2L, 8 Cyl 5.0L | 3AT C3, 3AT C4, 3AT C5, 4AT A4LD, 4AT AOD, 4MT, 5MT
View related parts
Ford Mustang Lockset - Complete Vehicle
Part Number: E7ZZ-6121984-B
Product Specifications
- Other Name: Cylinder & Key
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1993 Ford Mustang | 4 Cyl 2.3L, 8 Cyl 5.0L | 4AT A4LD, 4AT AOD, 5MT
View related parts
Ford Mustang Lockset - Complete Vehicle
Part Number: F3DZ-11582-A
Product Specifications
- Replaces: F1DZ-11582-A, F1AZ-11582-A, F3AZ-11582-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford Mustang | 6 Cyl 3.8L, 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.8L | 4AT 4R70W, 4AT AOD-E, 5MT
View related parts
Ford Mustang Lockset - Complete Vehicle
Part Number: F3DZ-11582-B
Product Specifications
- Other Name: Ignition Lock Cylinder, Lock Cylinder
- Replaces: F1AZ-11582-B, F3AZ-11582-B, F1DZ-11582-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford Mustang | 6 Cyl 3.8L, 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.8L | 4AT 4R70W, 4AT AOD-E, 5MT
View related parts
Ford Mustang Lockset - Complete Vehicle
Part Number: F3DZ-11582-C
Product Specifications
- Other Name: Ignition Lock Cylinder
- Replaces: F3AZ-11582-C, F1DZ-11582-C, F1AZ-11582-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford Mustang | 6 Cyl 3.8L, 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.8L | 4AT 4R70W, 4AT AOD-E, 5MT
View related parts
Ford Mustang Lockset - Complete Vehicle
Part Number: F3DZ-11582-D
Product Specifications
- Other Name: Ignition Lock Cylinder
- Replaces: F1DZ-11582-D, F1AZ-11582-D, F3AZ-11582-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford Mustang | 6 Cyl 3.8L, 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.8L | 4AT 4R70W, 4AT AOD-E, 5MT
View related parts
Ford Mustang Lockset - Complete Vehicle
Part Number: F3DZ-11582-E
Product Specifications
- Other Name: Ignition Lock Cylinder
- Replaces: F1AZ-11582-E, F3AZ-11582-E, F1DZ-11582-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford Mustang | 6 Cyl 3.8L, 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.8L | 4AT 4R70W, 4AT AOD-E, 5MT
View related parts
Ford Mustang Lockset - Complete Vehicle
Part Number: F4ZZ-6322050-A
Product Specifications
- Other Name: Cylinder & Key, Lock Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Ford Mustang | 6 Cyl 3.8L, 8 Cyl 5.0L, 8 Cyl 5.8L | 4AT AOD-E, 5MT
View related parts
Ford Mustang Cylinder Assembly - Actuating
Part Number: F6ZZ-6322050-A
Product Specifications
- Other Name: CYLINDER ASY - ACTUA
- Replaced by: F8ZZ-6321990-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996 Ford Mustang | 6 Cyl 3.8L, 8 Cyl 4.6L | 4AT 4R70W, 5MT
View related parts
Ford Mustang Lock Cylinder With Keys
Part Number: F6ZZ-6322050-B
Product Specifications
- Replaced by: F8ZZ-6321990-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996 Ford Mustang | 6 Cyl 3.8L, 8 Cyl 4.6L | 4AT 4R70W, 5MT

Ford Mustang Ignition Lock Cylinder

The Ignition Lock Cylinder plays an important part in the Ford Mustang's vehicle since it enables the driver to have an access to the key that starts the engine. This component can be directly associated with the ignition system that creates the required power to make the vehicle run. In case Ignition Lock Cylinder becomes defective, Mustang may not start, and staying stuck in 'On' position may result to immobilization or higher theft rate. Different types of Ignition Lock Cylinder have been used in the Ford Mustang cars over the years to improve on their security and usability. Such cylinders may contain a specific key and tumbler configuration, therefore, the initially started car can be driven only with the help of the correct key. Thus, the development of Ignition Lock Cylinder is attributed to the developments in automotive engineering, meaning that the Ford Mustang is more safe and reliable today than it was a few years ago.

We provide a wide range of Ford Mustang Ignition Lock Cylinder at the best prices possible. If you need Ford Mustang Ignition Lock Cylinder, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Mustang Ignition Lock Cylinder Parts Questions & Experts Answers

Lock Assembly - Steering
5F9Z-11582-BA
Q: How do you remove and install the ignition switch and key lock cylinder on Ford Mustang?
A: Remove the ' minus' end of the cable from the battery. Disconnect lower steering column cover. To unlock the reduction gears from the lock cylinder housing, press on the two release tab and pull the ignition switch out. Pull out the electrical connector by operating the release tab from the ignition switch. It is the process where by the components that had been assembled are disassembled. Pull out the Passive Anti-Theft System transceiver by pulling the head of the screw backward on the retaining tabs located in the lugs on the lock cylinder housing. Depress the lock button on the lower left of the Ignition Lock Cylinder and insert the ignition key into the Ignition Lock Cylinder. By rotating the ignition key you will bring the ignition to the RUN position. To disarm the Ignition Lock Cylinder, push the safety flat blade into the hole that is on the bottom of the Ignition Lock Cylinder, this will release the retaining tab and pull out the lock cylinder. Removal on the other hand is just the opposite of installation.