×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Genuine Ford Taurus Fuel Injector
Gas Injector- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
23 Fuel Injectors found
Ford Taurus Injector Assembly
Part Number: BR3Z-9F593-B$46.63 MSRP: $74.36You Save: $27.73 (38%)Ships in 1-2 Business Days
Ford Taurus Injector Assembly
Part Number: 7T4Z-9F593-B$61.49 MSRP: $101.64You Save: $40.15 (40%)Ships in 1 Business Day
Ford Taurus Injector Assembly
Part Number: BB5Z-9F593-B$106.14 MSRP: $210.91You Save: $104.77 (50%)Ships in 1 Business Day
Ford Taurus Injector Assembly
Part Number: 4L8Z-9F593-AA$49.31 MSRP: $98.00You Save: $48.69 (50%)Ships in 1-2 Business Days
Ford Taurus Injector Assembly
Part Number: BA5Z-9F593-A$118.80 MSRP: $196.36You Save: $77.56 (40%)Ships in 1-2 Business Days
Ford Taurus Injector Assembly
Part Number: 7T4Z-9F593-A$61.49 MSRP: $101.64You Save: $40.15 (40%)Ships in 1 Business Day
Ford Taurus Injector Assembly
Part Number: AA5Z-9F593-D$162.80 MSRP: $269.09You Save: $106.29 (40%)Ships in 1-2 Business Days
Ford Taurus Injector Assembly
Part Number: AA5Z-9F593-C$162.80 MSRP: $269.09You Save: $106.29 (40%)Ships in 1-2 Business Days
Ford Taurus Injector Assembly
Part Number: F73Z9F593DA$61.15 MSRP: $83.55You Save: $22.40 (27%)Ships in 1 Business Day
Ford Taurus INJECTOR ASY
Part Number: F6DZ9F593BA$70.91 MSRP: $96.89You Save: $25.98 (27%)Ships in 1-2 Business Days
Ford Taurus Injector Assembly
Part Number: 2F1Z-9F593-AA$44.46 MSRP: $70.91You Save: $26.45 (38%)Ships in 1-2 Business Days
| Page 1 of 2 |Next >
1-20 of 23 Results
Ford Taurus Fuel Injector
The Fuel Injector in Ford Taurus vehicles is responsible for supplying fuel to a vehicle's engine cylinders so as to provide an ideal Air Fuel ratio to the car's combustion system. This system, which is commanded by the Engine Control Module can either inject fuel directly into the cylinder head combustion chamber or into the intake manifold, depending on the type of injection being used. For the years, the Ford Taurus models have employed both the direct fuel injection as well as the indirect fuel injection. Straight injection pumps fuel directly through the combustion chamber while indirect injection disperses fuel and air to the chamber. It is with these two types that direct injection has been accredited with better efficiency and performance outcomes. But the fuel injectors are able to develop some problems that include poor acceleration and low fuel efficiency of the Ford Taurus hence should be replaced promptly.
We provide a wide range of Ford Taurus Fuel Injector at the best prices possible. If you need Ford Taurus Fuel Injector, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Ford Taurus Fuel Injector Parts Questions & Experts Answers
- Q: How do you remove and install fuel injectors and the fuel rail on Ford Taurus?A: To begin, relieve the fuel system pressure and disconnect the cable from the negative battery terminal. For four-cylinder models, remove the intake manifold, disconnect the high-pressure fuel line from the Fuel Pump and fuel rail, and disconnect the electrical connectors for all wiring associated with the fuel injectors, followed by the four fuel injector electrical connectors. Use a trim removal tool to disengage the retainers securing the wiring harness to the fuel rail, then clean the area around each injector with compressed air. Remove and discard the fuel rail mounting fasteners, then take out the fuel rail and injectors, using new bolts for installation. If the fuel injectors remain in the cylinder heads, use a removal tool to extract them. Remove the old combustion chamber Teflon sealing ring, upper O-ring, and support ring from each injector, taking care not to damage the groove for the seal. Clean the groove and injector shaft thoroughly before installing the new Teflon seal using the recommended special tools or an alternative method with a socket. After installing the new seals, lubricate the new upper O-ring with clean engine oil and install it on the injector, ensuring the O-ring is above the support ring. Clean the injector bores, insert each injector into its bore in the fuel rail, and secure them with retaining clips. Install the injectors and fuel rail assembly on the cylinder head, tightening the mounting fasteners in the correct sequence. For V6 models, remove the appropriate intake manifold, disconnect the fuel supply line and electrical connectors, detach the retainers, and remove the fuel rail and injectors as a single assembly. Release the injector retaining clips and remove each injector, discarding the old O-rings. Coat the new O-rings with clean engine oil and install them on the injectors, then secure the injectors to the fuel rail. Install the intake manifold gaskets if necessary, attach the fuel rail assembly, and tighten the bolts. Finally, reconnect the cable to the negative battery terminal, turn the ignition switch to ON to activate the fuel pump, and check for fuel leaks.
Related Ford Taurus Parts
Browse by Year
2019 Fuel Injector 2018 Fuel Injector 2017 Fuel Injector 2016 Fuel Injector 2015 Fuel Injector 2014 Fuel Injector 2013 Fuel Injector 2012 Fuel Injector 2011 Fuel Injector 2010 Fuel Injector 2009 Fuel Injector 2008 Fuel Injector 2007 Fuel Injector 2006 Fuel Injector 2005 Fuel Injector 2004 Fuel Injector 2003 Fuel Injector 2002 Fuel Injector 2001 Fuel Injector 2000 Fuel Injector 1999 Fuel Injector 1998 Fuel Injector 1997 Fuel Injector 1996 Fuel Injector 1990 Fuel Injector 1989 Fuel Injector 1988 Fuel Injector