How to remove and install the hood latch and release cable on Ford Taurus?

To replace the hood latch, first open the hood and mark a line around the latch for alignment, then remove the retaining bolts securing the latch to the radiator support and take out the latch. Next, squeeze the cable retainer to release the cable from the latch assembly and disengage the cable end plug from the latch. For the release cable, work in the engine compartment to disconnect it from the latch after removing the hood latch. On 2011 and earlier models, take out the radiator grille pin-type fasteners and panel, then detach the two release cable clips from the radiator support. For 2012 and later models, remove the battery tray and air filter housing. Loosen the left front wheel lug nuts, raise the vehicle securely on jackstands, and remove the wheel along with the inner fender splash shield. Open the two release cable clips in the upper part of the fender opening and detach the release cable from the clips. On 2012 and later models, it may be necessary to remove the Smart Junction Box, then disengage the release cable clip from the wiring harness. Remove the two hood release handle mounting bolts, pull out the handle, disengage the release cable from the release handle, and pull the release cable through the firewall. Finally, installation is the reverse of removal.

Genuine Ford Taurus Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hood Latches found

View related parts
Ford Taurus Latch Assembly - Hood
Part Number: AG1Z-16700-A
$39.10 MSRP: $56.67
You Save: $17.57 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assy - Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Taurus | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.5L DOHC T/C, 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Latch Assembly - Hood
Part Number: 5F1Z-16700-AA
$35.86 MSRP: $52.43
You Save: $16.57 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assy - Hood; Latch, Lock
- Manufacturer Note: Includes auxiliary hood safety catch
- Replaces: YF1Z-16700-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Taurus | 6 Cyl 3.0L | 4AT 4F50N, 4AT AX4N, 4AT AX4S
View related parts
Ford Taurus Latch Assembly - Hood
Part Number: YF1Z-16700-AA
$35.86 MSRP: $52.43
You Save: $16.57 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assy - Hood
- Manufacturer Note: Includes auxiliary hood safety catch
- Replaced by: 5F1Z-16700-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Taurus | 6 Cyl 3.0L | 4AT 4F50N, 4AT AX4N, 4AT AX4S
View related parts
Ford Taurus Latch Assembly - Hood
Part Number: 5G1Z-16700-AA
$16.57 MSRP: $23.60
You Save: $7.03 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assy - Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Latch Assembly - Hood
Part Number: XF1Z-16700-AA
$37.21 MSRP: $51.69
You Save: $14.48 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assy - Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999 Ford Taurus | 6 Cyl 3.0L, 8 Cyl 3.4L | 4AT AX4N, 4AT AX4S
View related parts
Ford Taurus Latch Assembly - Hood
Part Number: E6DZ-16700-A
Product Specifications
- Other Name: Latch Assy - Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1988 Ford Taurus | 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.8L | 3AT ATX, 4AT AXOD, 5MT
View related parts
Ford Taurus Latch Assembly - Hood
Part Number: F4DZ-16700-A
Product Specifications
- Other Name: Latch Assy - Hood
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Ford Taurus | 6 Cyl 3.0L, 6 Cyl 3.2L, 6 Cyl 3.8L | 4AT AX4N, 4AT AX4S, 4AT AXOD-E, 5MT
View related parts
Ford Taurus Latch Assembly - Hood
Part Number: F6DZ-16700-AC
Product Specifications
- Other Name: LATCH ASY - HOOD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1998 Ford Taurus | 6 Cyl 3.0L, 8 Cyl 3.4L | 4AT AX4N, 4AT AX4S

Ford Taurus Hood Latch

The Hood Latch in Ford Taurus cars is a very important unit since it closes and locks the hood so that it does not open during the operation of the car. This component is placed at an optimal area below the front of the hood where essential parts such as an engine, radiator and battery will be safely enclosed as one drives. There are different Hood Latch used in Ford Taurus through the years with the purpose of improving functionality and safety. While specific differences between these types may not be detailed, the primary goal remains consistent: to protect the structural part of the vehicle such as the hood and other important structures within a car. The Ford Taurus Hood Latch is a perfect example of this goal for vehicle safety as well as utility.

We provide a wide range of Ford Taurus Hood Latch at the best prices possible. If you need Ford Taurus Hood Latch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Taurus Hood Latch Parts Questions & Experts Answers

Latch Assembly - Hood
AG1Z-16700-A
Q: How to remove and install the hood latch and release cable on Ford Taurus?
A: To replace the hood latch, first open the hood and mark a line around the latch for alignment, then remove the retaining bolts securing the latch to the radiator support and take out the latch. Next, squeeze the cable retainer to release the cable from the latch assembly and disengage the cable end plug from the latch. For the release cable, work in the engine compartment to disconnect it from the latch after removing the hood latch. On 2011 and earlier models, take out the radiator grille pin-type fasteners and panel, then detach the two release cable clips from the radiator support. For 2012 and later models, remove the battery tray and air filter housing. Loosen the left front wheel lug nuts, raise the vehicle securely on jackstands, and remove the wheel along with the inner fender splash shield. Open the two release cable clips in the upper part of the fender opening and detach the release cable from the clips. On 2012 and later models, it may be necessary to remove the Smart Junction Box, then disengage the release cable clip from the wiring harness. Remove the two hood release handle mounting bolts, pull out the handle, disengage the release cable from the release handle, and pull the release cable through the firewall. Finally, installation is the reverse of removal.