How to remove and install the EVAP canister purge valve and EVAP canister on Ford Taurus?

The canister purge valve on 2007 and earlier models with a 3.0L V6 engine is located tightly on a bracket near the power steering fluid tank. Start with the removal of the cable that is attached on the negative terminal of the battery, next is the removal of the electrical connector from the canister purge valve. Then, the EVAP line quick-connect fittings have to be disconnected, the purge valve mounting fasteners to be removed and the assembly has to be taken out, installation being the reverse of the procedure mentioned above; if for V6 engines, the installation of the purge valve needs a new O-ring. The EVAP canister can be located under the car near the rear part of the car. Pull out the cable from the negative battery terminal; then support the vehicle on jackstands, and unscrew the splash shield, if it is installed. Remove the electrical connector and the vapor hose of the canister vent solenoid dust separator and the two EVAP line quick-connect fittings of the canister. The procedure for removing is the same for its installation, namely-unlatch the canister mounting fasteners and pull the canister out, and the installation is done by reversing the above process. The EVAP canister vent solenoid is located on the EVAP canister, while on the engines 3.0L engines a vent tube to vent solenoid assembly is required to be detached. Exit the canister by pulling on the hook on top of the vent solenoid and releasing two lock tabs to take off the vent solenoid heat shield, unlock the fuel vapor hose from the vent solenoid and then removing the vent solenoid and dust separator assembly from the canister by pulling straight upward on the hook, and the reverse order for reassembly.

Genuine Ford Taurus Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Vapor Canisters found

View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: AG1Z-9D653-A
$168.07 MSRP: $229.65
You Save: $61.58 (27%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2014 Ford Taurus | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.5L DOHC T/C, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Reservoir Assembly
Part Number: F6DZ-9D653-BA
$146.30 MSRP: $241.82
You Save: $95.52 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assy; Vapor Canister
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2003 Ford Taurus | 6 Cyl 3.0L, 8 Cyl 3.4L | 4AT 4F50N, 4AT AX4N, 4AT AX4S
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: AG1Z-9D653-C
$136.40 MSRP: $225.45
You Save: $89.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: AG1Z-9D653-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2019 Ford Taurus | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.5L DOHC T/C, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 8G1Z-9D653-K
$136.40 MSRP: $225.45
You Save: $89.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: AG1Z-9D653-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, CVT Select Shift Transmission, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: AG1Z-9D653-B
$136.40 MSRP: $225.45
You Save: $89.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: AG1Z-9D653-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014-2015 Ford Taurus | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.5L DOHC T/C, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 8G1Z-9D653-E
Product Specifications
- Replaced by: 8G1Z-9D653-P
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Reservoir Assembly
Part Number: 4F1Z-9D653-BA
Product Specifications
- Other Name: Reservoir Assy; Vapor Canister
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Taurus | 6 Cyl 3.0L | 4AT 4F50N
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 4F1Z-9D653-DA
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Taurus | 6 Cyl 3.0L | 4AT 4F50N
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 5F1Z-9D653-AA
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Taurus | 6 Cyl 3.0L | 4AT 4F50N
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 5F1Z-9D653-BA
Product Specifications
- Replaced by: 6F1Z-9D653-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Taurus | 6 Cyl 3.0L | 4AT 4F50N
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 6F1Z-9D653-AA
Product Specifications
- Replaces: 5F1Z-9D653-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Taurus | 6 Cyl 3.0L | 4AT 4F50N
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 8G1Z-9C985-A
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 8G1Z-9C985-B
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 8G1Z-9C985-C
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Reservoir Assembly
Part Number: 8G1Z-9D653-A
Product Specifications
- Other Name: Reservoir Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Reservoir Assembly
Part Number: 8G1Z-9D653-B
Product Specifications
- Other Name: Reservoir Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 8G1Z-9D653-C
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 8G1Z-9D653-D
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Reservoir Assembly
Part Number: 8G1Z-9D653-G
Product Specifications
- Other Name: Reservoir Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Cannister - Fuel Vapour Store
Part Number: 8G1Z-9D653-H
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

| Page 1 of 2 |Next >

1-20 of 23 Results

Ford Taurus Vapor Canister

The Vapor Canister in the Ford Taurus automobiles is used EVAP system with the purpose of managing the evaporation of hydrocarbons so that they do not emit into the environment. This component is also known as the carbon or charcoal canister, where fuel vapors is stored and admitted into the engine system as and when it is needed, where they are mixed with air and burnt in the engine cylinder. Different types of Vapor Canisters have been used in the Ford Taurus over the years and the differences are seen in the shape and testing features. Contemporary Ford Taurus models have improved EVAP systems that consist of extra devices for leakage detection including canister vent solenoid and fuel tank pressure sensor to warrant proper functionality of the system and reduce emissions.

We provide a wide range of Ford Taurus Vapor Canister at the best prices possible. If you need Ford Taurus Vapor Canister, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Taurus Vapor Canister Parts Questions & Experts Answers

Cannister - Fuel Vapour Store
AG1Z-9D653-A
Q: How to remove and install the EVAP canister purge valve and EVAP canister on Ford Taurus?
A: The canister purge valve on 2007 and earlier models with a 3.0L V6 engine is located tightly on a bracket near the power steering fluid tank. Start with the removal of the cable that is attached on the negative terminal of the battery, next is the removal of the electrical connector from the canister purge valve. Then, the EVAP line quick-connect fittings have to be disconnected, the purge valve mounting fasteners to be removed and the assembly has to be taken out, installation being the reverse of the procedure mentioned above; if for V6 engines, the installation of the purge valve needs a new O-ring. The EVAP canister can be located under the car near the rear part of the car. Pull out the cable from the negative battery terminal; then support the vehicle on jackstands, and unscrew the splash shield, if it is installed. Remove the electrical connector and the vapor hose of the canister vent solenoid dust separator and the two EVAP line quick-connect fittings of the canister. The procedure for removing is the same for its installation, namely-unlatch the canister mounting fasteners and pull the canister out, and the installation is done by reversing the above process. The EVAP canister vent solenoid is located on the EVAP canister, while on the engines 3.0L engines a vent tube to vent solenoid assembly is required to be detached. Exit the canister by pulling on the hook on top of the vent solenoid and releasing two lock tabs to take off the vent solenoid heat shield, unlock the fuel vapor hose from the vent solenoid and then removing the vent solenoid and dust separator assembly from the canister by pulling straight upward on the hook, and the reverse order for reassembly.