×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Genuine Ford Taurus Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
14 Wiper Motors found
Ford Taurus Motor Assembly - Wiper
Part Number: F6DZ-17508-AA$53.61 MSRP: $73.25You Save: $19.64 (27%)
Ford Taurus WPR MOTOR
Part Number: E6DZ17508B$91.09 MSRP: $124.46You Save: $33.37 (27%)Ships in 1-2 Business Days
Ford Taurus Motor Assembly - Wiper
Part Number: DG1Z-17508-A$158.40 MSRP: $261.82You Save: $103.42 (40%)Ships in 1-2 Business Days
Ford Taurus Motor Assembly - Wiper
Part Number: 8G1Z-17508-A$117.12 MSRP: $160.03You Save: $42.91 (27%)
Ford Taurus Wiper Motor
The Wiper Motor in Ford Taurus cars works to control the wiper of the car so that it can wipe the water and dirt on the wind Shields so as to enhance visibility of the road. Pieced to this electric motor, it rotates at different speeds and this helps the drivers to vary the wiper movement as needed depending on the prevailing weather conditions. Some may have Refurbished Wiper Motors while others may come with new Wiper Motors. New motors are purchased directly from manufacturers, whereas remanufactured motors are used ones which are replaced with new parts in order to produce efficient performance. The difference between these types mainly stems from the condition and the degree of repair work that has been done in the new motors come with modern technology while the refurbished motors are available at lower costs. In general, the Wiper Motor is amongst the most essential systems to ensure safety and visibility of the Ford Taurus cars.
We provide a wide range of Ford Taurus Wiper Motor at the best prices possible. If you need Ford Taurus Wiper Motor, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Ford Taurus Wiper Motor Parts Questions & Experts Answers
- Q: How do you replace the wiper motor and windshield washer reservoir or washer pump on Ford Taurus?A: In order to replace wiper motor the cable must be disconnected from the negative terminal of the battery. Before, loosening the wiper nut arm, align the wiper to the wiper linkage pivot with the shafts then unscrew the nut holding the wiper arm. Also, take off the connecting wiring between the parking lamp and the washer switch, in addition to the plastic cowl cover and three bolts on the wiper linkage assembly. Swing the entire linkage arm and motor assembly down and forward to pull the main electrical connection plug, and then take out the wiper motor and linkage assembly together. Remove three bolts that fasten the wiper motor and one nut that connect the linkage arm to the motor shaft when the wiper motor is in the park position remove the linkage arm. Gently prise off the linkage by inserting a trim removal tool or screwdriver between it and the motor's crank arm. When a replacement motor is needed, it should be installed on the linkage and the assembly should then be reinstalled so that all the bolts holding the linkage arms are tightened, and the electrical connections are made properly the vicinity around the linkage arms should not have any tools or loose items lying on it. Set the ignition on but do not start the engine: move the wiper switch from the high speed position to the stand still position in order to make sure that the wiper motor is parked: then fit back the cowl cover and the wiper blades. From the bottom of the windshield, the proper adjustment for the wiper arm is at 1-1/2 inch for the passenger blade and at 2 inches for the driver side wiper arm. Repeat the cycling of the wiper switch in order to ensure the correct alignment and if some adjustments have to be made, then it is very necessary to detach the arms and reposition them. For windshield washer reservoir or washer pump replacement on 2007 and earlier models, remove the bolts securing the coolant expansion tank and lift it up, keep this part but do not disconnect the hoses from it. Remove the electrical connector for the washer fluid sensor, then undo the single bracket which holds the high-side refrigerant line to the reservoir and take off the three washers which connect the reservoir in place. Turn the valves off, and drain out the water from the washer reservoir; also, remove the washer pump's electrical connection. If needed, remove the washer pump, which is fixed with the help of a rubber gasket on the case of the tank. For production on and after 8/2008, erase the lower front air deflector leaf and the inner fender splash shield at the right side, and then relay twice the washer fluid level sensor connector and the washer pump connector. Remove the washer pump hose and empty the reservoir and then undo the reservoir bolt, and the two washer type nuts before pulling the reservoir from the bottom. Should this be needed, then the washer pump needs to be replaced: it is attached to the tank with the help of rubber grommet. Removal of both model years is the reverse of installation.
Related Ford Taurus Parts
Ford Taurus Windshield Wiper
Ford Taurus Windshield Washer Nozzle
Ford Taurus Wiper Arm
Ford Taurus Washer Pump
Ford Taurus Power Window Motor
Ford Taurus Wiper Pivot
Ford Taurus Washer Reservoir
Browse by Year
2019 Wiper Motor 2018 Wiper Motor 2017 Wiper Motor 2016 Wiper Motor 2015 Wiper Motor 2014 Wiper Motor 2013 Wiper Motor 2012 Wiper Motor 2011 Wiper Motor 2010 Wiper Motor 2009 Wiper Motor 2008 Wiper Motor 2007 Wiper Motor 2006 Wiper Motor 2005 Wiper Motor 2004 Wiper Motor 2003 Wiper Motor 2002 Wiper Motor 2001 Wiper Motor 2000 Wiper Motor 1999 Wiper Motor 1998 Wiper Motor 1997 Wiper Motor 1996 Wiper Motor 1995 Wiper Motor 1994 Wiper Motor 1993 Wiper Motor 1992 Wiper Motor 1991 Wiper Motor 1990 Wiper Motor 1989 Wiper Motor 1988 Wiper Motor 1987 Wiper Motor 1986 Wiper Motor