How to replace the hazard and turn signal switches on Lincoln Continental?

The hazard and turn signal switches on earlier models are part of the turn signal switch hub assembly while in later models they are integrated into the multi-function switch. Disconnect the battery cable to replace the turn signal and hazard switch. Lower the cover, and remove the steering wheel. At the harness connectors, disconnect the wires from the switches. Remove the hazard switch by lifting it after unscrewing a retaining screw. Unscrew a turn signal handle, lift out this switch after removing retaining screws. Pull wires through the hub, remove the plastic cover, remove the assembly. Insert new switch wires through the hub and connect them to the connector. For complete installation reverse removal steps.

How to remove and install Turn Signal Switch on a Lincoln Continental?

Disconnect the cable from the negative battery terminal. For 1989 and earlier models, grasp the switch lever securely and remove it by pulling straight out. Remove the steering column covers. Remove the switch cover, then disconnect the connector, remove the retaining screws and withdraw the Turn Signal Switch assembly from the steering column. Place the switch in position and install the screws, then connect the electrical connector. Install the steering column covers. Line up the tangs on the lever with the slot in the switch and install it by pushing straight in. For 1990 and later models, remove the steering column covers. On most models, the ignition lock cylinder must be removed first, and on models with tilt-column steering, the tilt lever must also be removed before removing the covers. Remove the two retaining screws, pull the switch out, disconnect the connector and detach the Turn Signal Switch assembly from the steering column. Connect the electrical connector, insert the switch into the steering column and install the screws. Install the steering column covers, lock cylinder and tilt lever if equipped. For all models, connect the cable to the negative battery terminal.

Genuine Lincoln Continental Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Turn Signal Switches found

View related parts
Lincoln Continental Switch Assembly
Part Number: G3GZ-13341-AA
$57.00 MSRP: $83.33
You Save: $26.33 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy; Signal Switch, Turn Signal Switch
- Manufacturer Note: BLACK
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln Continental | 4 Cyl 2.0L EcoBoost (240PS), 6 Cyl 2.7 L GAS, 6 Cyl 2.7L, 6 Cyl 3.0 L GAS, 6 Cyl 3.0L, 6 Cyl 3.7 L GAS, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln Continental Switch Assembly
Part Number: G3GZ-13341-BA
$71.93 MSRP: $105.17
You Save: $33.24 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy
- Manufacturer Note: BLACK
- Replaced by: G3GZ-13341-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Lincoln Continental | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 2.7L, 6 Cyl 3.0L, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln Continental Switch Assembly - Direction Indicator
Part Number: XF3Z-13K359-BA
$156.43 MSRP: $213.74
You Save: $57.31 (27%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Direction Indicator
- Manufacturer Note: Service only, w/auto headlamp dimmer
- Replaced by: XF3Z-13K359-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1997 Lincoln Continental | 6 Cyl 3.8L, 8 Cyl 4.6L | 4AT 4F50N, 4AT AX4N, 4AT AX4S, 4AT AXOD-E
View related parts
Lincoln Continental Switch Assembly
Part Number: G3GZ-13341-BB
$71.93 MSRP: $105.17
You Save: $33.24 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Signal Switch, Turn Signal Switch
- Replaces: G3GZ-13341-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln Continental | 4 Cyl 2.0L EcoBoost (240PS), 6 Cyl 2.7 L GAS, 6 Cyl 2.7L, 6 Cyl 3.0 L GAS, 6 Cyl 3.0L, 6 Cyl 3.7 L GAS, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln Continental Switch - Dir. Indic/Warning Flasher
Part Number: E7SZ-13341-A
Product Specifications
- Other Name: Turn Signal & Hazard Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1987 Lincoln Continental | 6 Cyl 2.4L, 8 Cyl 5.0L | 4AT, 4AT AOD
View related parts
Lincoln Continental Switch Dir Indic/Warn
Part Number: E2FZ13341A
Product Specifications
- Other Name: Switch - Dir. Indic/Warning Flasher; Turn Signal & Hazard Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1984 Lincoln Continental | 6 Cyl 2.4L, 6 Cyl 3.8L, 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Continental Switch Assembly - Direction Indicator
Part Number: YF3Z-13K359-AA
Product Specifications
- Other Name: Switch Assy - Direction Indicator
- Manufacturer Note: Chrome stalk
- Replaced by: YF3Z-13K359-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000 Lincoln Continental | 8 Cyl 4.6L | 4AT AX4N
View related parts
Lincoln Continental Switch Assy - Direction Indicator
Part Number: YF3Z-13K359-AB
Product Specifications
- Other Name: Combination Switch, Multifunction Switch
- Manufacturer Note: Chrome stalk
- Replaces: YF3Z-13K359-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Lincoln Continental | 8 Cyl 4.6L | 4AT 4F50N, 4AT AX4N

Lincoln Continental Turn Signal Switch

We provide a wide range of Lincoln Continental Turn Signal Switch at the best prices possible. If you need Lincoln Continental Turn Signal Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Lincoln Continental Turn Signal Switch Parts Questions & Experts Answers

Switch - Dir. Indic/Warning Flasher
E7SZ-13341-A
Q: How to replace the hazard and turn signal switches on Lincoln Continental?
A: The hazard and turn signal switches on earlier models are part of the turn signal switch hub assembly while in later models they are integrated into the multi-function switch. Disconnect the battery cable to replace the turn signal and hazard switch. Lower the cover, and remove the steering wheel. At the harness connectors, disconnect the wires from the switches. Remove the hazard switch by lifting it after unscrewing a retaining screw. Unscrew a turn signal handle, lift out this switch after removing retaining screws. Pull wires through the hub, remove the plastic cover, remove the assembly. Insert new switch wires through the hub and connect them to the connector. For complete installation reverse removal steps.
Switch - Dir. Indic/Warning Flasher
E7SZ-13341-A
Q: How to remove and install Turn Signal Switch on a Lincoln Continental?
A: Disconnect the cable from the negative battery terminal. For 1989 and earlier models, grasp the switch lever securely and remove it by pulling straight out. Remove the steering column covers. Remove the switch cover, then disconnect the connector, remove the retaining screws and withdraw the Turn Signal Switch assembly from the steering column. Place the switch in position and install the screws, then connect the electrical connector. Install the steering column covers. Line up the tangs on the lever with the slot in the switch and install it by pushing straight in. For 1990 and later models, remove the steering column covers. On most models, the Ignition Lock Cylinder must be removed first, and on models with tilt-column steering, the tilt lever must also be removed before removing the covers. Remove the two retaining screws, pull the switch out, disconnect the connector and detach the Turn Signal Switch assembly from the steering column. Connect the electrical connector, insert the switch into the steering column and install the screws. Install the steering column covers, lock cylinder and tilt lever if equipped. For all models, connect the cable to the negative battery terminal.