How do you remove and replace the master cylinder in your Lincoln MKX?

First of all, begin by locating the brake master cylinder under the hood of your car. Take out the other parts until you reach the cylinder. Remove fluid from the reservoir. Detach the brake booster check valve and electrical connector. Crack open line fittings and cap line ends. Unfasten the nuts attaching it and gently draw it off. Put it on the power brake booster, and snug down brake line fittings. Refill the reservoir, bleed the brake master cylinder and brake system, and test your brakes before use.

Genuine Lincoln MKX Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Master Cylinders found

View related parts
Lincoln MKX Cylinder Assy - Master
Part Number: BT4Z-2140-A
$103.51 MSRP: $171.09
You Save: $67.58 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Manufacturer Note: There Is No O Ring Seal Used Between Booster And Master Cylinder
- Replaced by: CT4Z-2140-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Lincoln MKX | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Cylinder Assy - Master
Part Number: 7T4Z-2140-A
$103.51 MSRP: $171.09
You Save: $67.58 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Manufacturer Note: There Is No O Ring Seal Used Between Booster And Master Cylinder
- Replaced by: CT4Z-2140-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Kit - Master Cylinder Repair
Part Number: F2GZ-2140-A
$62.77 MSRP: $124.73
You Save: $61.96 (50%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Replaced by: J2GZ-2140-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 2.7L, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 8-Speed Automatic Transmission 8F35, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Lincoln MKX Brake Master Cylinder

In Lincoln MKX automobiles, the Brake Master Cylinder is a significant item used to transform force applied by foot into hydraulic pressures that control slave cylinders. This system uses hydraulics to transmit force from the master cylinder's piston to the slave cylinders; force and displacement are increased. Master cylinders are responsible for calipers or drum brakes for the purpose of the brake as well as the slave cylinder for the clutch setting. Lincoln MKX vehicles employ a diagonally split hydraulic system, with one piston of the master cylinder responsible for one circuit so that an individual circuit can continue to work if the other is defective. In general, the Brake Master Cylinder in Lincoln MKX vehicles plays its part to govern the hydraulic force and pressure distribution for smooth and safe braking and clutch operations.

We provide a wide range of Lincoln MKX Brake Master Cylinder at the best prices possible. If you need Lincoln MKX Brake Master Cylinder, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Lincoln MKX Brake Master Cylinder Parts Questions & Experts Answers

Cylinder Assy - Master
BT4Z-2140-A
Q: How do you remove and replace the master cylinder in your Lincoln MKX?
A: First of all, begin by locating the brake master cylinder under the hood of your car. Take out the other parts until you reach the cylinder. Remove fluid from the reservoir. Detach the Brake Booster check valve and electrical connector. Crack open line fittings and cap line ends. Unfasten the nuts attaching it and gently draw it off. Put it on the power brake booster, and snug down Brake Line fittings. Refill the reservoir, bleed the brake master cylinder and brake system, and test your brakes before use.