How to install and remove the hood latch and release cable on Lincoln MKX?

To fit the hood latch, one has to reverse the observed procedure of fitting the grille shutter by making a note of the fact that the active grille shutter has to be removed where the model is 2015 and above. Draw a pencil line around the latch for alignment purpose and then unbolt the retaining bolts that hold the hood latch to the radiator support and pull out the latch. After that, it is necessary to put the pressure on the cable retainer to free it from the latch assembly and to detach the cable end plug. For the release cable, it is up in the engine compartment that is where you have to get rid of the hood latch and also free the hood release cable from the latch. Remove the two release cable clips from the radiator support, undo the left front wheellug nuts, safely jack up the car on jack stands and remove the wheel, also take off the inner fender splash shield. Pull free the two latches on the top of the fender opening to release the cable from its clips and to release the cable clip from the wiring harness though on some models it may be required to remove the Smart Junction Box. Last but not least, it is necessary to remove the two hood release handle mounting bolts, to take out the hood release handle, to disconnect the release cable from the release handle and to pull the cable through the fire wall.

Genuine Lincoln MKX Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Hood Latches found

View related parts
Lincoln MKX Latch Assembly - Hood
Part Number: 6E5Z-16700-AA
$25.29 MSRP: $36.97
You Save: $11.68 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assy - Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Latch Assembly - Hood
Part Number: AE9Z-16700-A
$55.95 MSRP: $81.80
You Save: $25.85 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch, Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Lincoln MKX | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Latch Assembly - Hood
Part Number: FA1Z-16700-A
$77.17 MSRP: $112.82
You Save: $35.65 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assy - Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 2.7L, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 8-Speed Automatic Transmission 8F35, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Lincoln MKX Hood Latch

The Hood Latch in Lincoln MKX car is important since its main task is to lock the hood to avoid it from opening while driving the car. This mechanism is very useful when protecting the most crucial parts of the car such as the engine, radiator and battery. There may be different variations of Hood Latch may have been used in Lincoln MKX years, developed to improve on the reliability and performance aspect. While specific differences between these styles are not detailed, the primary goal remains consistent: Hood latch - to make sure it stays closed while the vehicle is in motion thus safeguarding the vehicle's vital organs. This case of Lincoln MKX Hood Latch brings out the need for this component in enhancing the safety and functionality of the car.

We provide a wide range of Lincoln MKX Hood Latch at the best prices possible. If you need Lincoln MKX Hood Latch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Lincoln MKX Hood Latch Parts Questions & Experts Answers

Latch Assembly - Hood
6E5Z-16700-AA
Q: How to install and remove the hood latch and release cable on Lincoln MKX?
A: To fit the hood latch, one has to reverse the observed procedure of fitting the grille shutter by making a note of the fact that the active grille shutter has to be removed where the model is 2015 and above. Draw a pencil line around the latch for alignment purpose and then unbolt the retaining bolts that hold the hood latch to the radiator support and pull out the latch. After that, it is necessary to put the pressure on the cable retainer to free it from the latch assembly and to detach the cable end plug. For the release cable, it is up in the engine compartment that is where you have to get rid of the hood latch and also free the hood release cable from the latch. Remove the two release cable clips from the radiator support, undo the left front wheellug nuts, safely jack up the car on jack stands and remove the wheel, also take off the inner fender splash shield. Pull free the two latches on the top of the fender opening to release the cable from its clips and to release the cable clip from the wiring harness though on some models it may be required to remove the Smart Junction Box. Last but not least, it is necessary to remove the two hood release handle mounting bolts, to take out the hood release handle, to disconnect the release cable from the release handle and to pull the cable through the fire wall.