×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Genuine Lincoln MKX Ignition Lock Cylinder
Ignition Key Lock Cylinder- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Ignition Lock Cylinders found
Lincoln MKX Cylinder Ignition
Part Number: AU5Z-11582-B$70.02 MSRP: $130.73You Save: $60.71 (47%)Ships in 1-2 Business Days
Lincoln MKX Lock Assembly - Steering And Ignition
Part Number: 5S4Z-11582-BB$80.70 MSRP: $160.36You Save: $79.66 (50%)Ships in 1-2 Business Days
Lincoln MKX Ignition Lock Cylinder
The Lincoln MKX vehicle is equipped with an Ignition Lock Cylinder that helps to start the engine by way of inserting a key and turning it. This is one of the components of the ignition switch through which the battery current flow to the required circuits only if the correct key is inserted. Depending on the periods of production, the design may also be of key operated design while the later models may be equipped with keyless ignition system for efficiency. Nevertheless, the concept was developed and put into practice in vehicles and the Ignition Lock Cylinder can still get worn over time and this can make it challenging to turn the key or even start the vehicle's engine. Problems can be attributed to worn keys or a faulty tumbler, or an actual problem with the switch of the ignition. Security systems also form a part of today's Lincoln MKX with the use of coded keys and keyless entry systems that will have to relay with the car's computer to ensure that the engine does not start. To sum it up practically and to emphasize the idea of safety, the Ignition Lock Cylinder is still crucial in Lincoln MKX automobiles.
We provide a wide range of Lincoln MKX Ignition Lock Cylinder at the best prices possible. If you need Lincoln MKX Ignition Lock Cylinder, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Lincoln MKX Ignition Lock Cylinder Parts Questions & Experts Answers
- Q: How do you remove and install the key lock cylinder and ignition switch on Lincoln MKX?A: Disconnect the cable from the negative terminal of the battery. Remove the instrument cluster upper and lower trim panels. Using a small screwdriver, detach the tabs securing the Passive Anti-Theft System (PATS) transceiver to the ignition lock cylinder housing, then pull the transceiver off the housing and disconnect the electrical connector. Insert the ignition key into the ignition lock cylinder and turn it to the ACC position. Insert an awl or suitable tool into the hole in the underside of the ignition lock cylinder, then depress the ignition lock cylinder retaining tab and remove the ignition lock cylinder. To install the ignition lock cylinder, insert it into the lock cylinder housing and push it in until it clicks into place. Verify that the ignition switch operates correctly in the OFF, ACC, RUN, and START positions, with installation being the reverse of removal. For 2014 and earlier models, do not remove the ignition switch and the ignition lock cylinder at the same time to avoid damaging the steering column. Remove the fasteners securing the ignition lock cylinder housing, disconnect the electrical connector for the PATS transceiver, and disconnect the electrical connector from the ignition switch. Depress the release tabs to detach the ignition switch from the ignition lock cylinder, ensuring that it snaps into place during installation, which is otherwise the reverse of removal. For 2015 and later keyless entry models, carefully pry out the left-side center air register from the instrument panel using a trim tool, disconnect the electrical connector from the push start ignition switch, and from the back side of the instrument panel, depress the two retaining tabs on the switch then push the ignition switch button out of the instrument panel.
