How do you replace the Intake Manifold Temperature Sensor and Mass Air Flow Sensor on Lincoln MKX?

To remove the air intake duct, disconnect the electrical connector from the MAF/Intake Manifold Temperature Sensor placed on the air filter housing cover. Then, remove the MAF/Intake Manifold Temperature Sensor mounting fasteners and take out the sensor from the air filter housing. Installation is the reverse of the removal.

Genuine Lincoln MKX Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mass Air Flow Sensors found

View related parts
Lincoln MKX Sensor Assembly
Part Number: 8V2Z-12B579-A
$119.90 MSRP: $198.18
You Save: $78.28 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assy; Air Mass Sensor, Mass Air Flow Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2015 Lincoln MKX | 4 Cyl 2.0L EcoBoost (240PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Sensor Assembly
Part Number: 3L3Z-12B579-BA
$152.90 MSRP: $252.73
You Save: $99.83 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assy
- Manufacturer Note: 4.6L, Police
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2015 Lincoln MKX | 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Lincoln MKX Mass Air Flow Sensor

The Mass Air Flow Sensor is required in Lincoln MKX automobiles to forecast the volume of air that enters the engine. This information is sent to the PCM a consultant of which changes the fuel injector timing to recommend the right proportions of air and fuel to be burnt. These include the Vane Meter (VAF) and the Hot Wire Mass Air Flow sensors and the Lincoln MKX models incorporate all these. The VAF sensor is constructed as a spring-loaded vane, which measures the airflow, but typical problems may occur, such as restricted coupling airflow and certain mechanical wear. However, the Hot Wire sensor is more accurate, where a wire is heated, and the current variation is seeking; however, contamination interferes with it. Maintenance of the MAF sensor is therefore important essential since its failure can lead to problems such as stalling or wrong mixture.

We provide a wide range of Lincoln MKX Mass Air Flow Sensor at the best prices possible. If you need Lincoln MKX Mass Air Flow Sensor, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Lincoln MKX Mass Air Flow Sensor Parts Questions & Experts Answers

Sensor Assembly
8V2Z-12B579-A
Q: How do you replace the Intake Manifold Temperature Sensor and Mass Air Flow Sensor on Lincoln MKX?
A: To remove the air intake duct, disconnect the electrical connector from the MAF/Intake Manifold Temperature Sensor placed on the air filter housing cover. Then, remove the MAF/Intake Manifold Temperature Sensor mounting fasteners and take out the sensor from the air filter housing. Installation is the reverse of the removal.