How to replace a steering gear boot on Lincoln MKX?

Loosen the lug nuts, raise the vehicle and support it securely on jack stands. Remove the wheel. Remove the tie-rod end and jam nut. Remove the outer rack and pinion boot clamp with a pair of pliers. The outer ends of the rack and pinion boots are secured by band-type clamps; they're easily removed with a pair of pliers. The inner ends are retained by boot clamps which must be cut off and discarded. Cut off the inner boot clamp with a pair of diagonal cutters. Slide off the boot. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with a layer of tape so the small end of the new boot isn't damaged. Slide the new boot into position on the rack and pinion until it seats in the groove in the steering rod and install new clamps. Remove the tape and install the tie-rod end. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque.

Genuine Lincoln MKX Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rack and Pinion Boots found

View related parts
Lincoln MKX Boot
Part Number: 7T4Z-3K661-B
$27.50 MSRP: $39.17
You Save: $11.67 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod Boot
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2015 Lincoln MKX | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Boot
Part Number: 7T4Z-3K661-A
$26.79 MSRP: $39.17
You Save: $12.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod Boot
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2015 Lincoln MKX | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Boot
Part Number: DG9Z-3K661-A
$18.76 MSRP: $34.17
You Save: $15.41 (46%)
ADD TO CART
Product Specifications
- Manufacturer Note: RH/LH
- Position: Passenger Side/Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 2.7L, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 8-Speed Automatic Transmission 8F35, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Lincoln MKX Rack and Pinion Boot

About Rack and Pinion Boot in Lincoln MKX The Rack and Pinion Boot in Lincoln MKX is extremely useful in protecting the steering rack from dust and other debris. This rubber portion is located at two ends of the rack in order to provide a protective shield to the interior set up of the mechanism. As for the Rack and Pinion Boot, if damaged of will lead to the increased risk and likelihood of issues with the rack and pinion system and possibly failure. While the overview does not specify different types or styles of Rack and Pinion Boot used in various MKX models, the primary function remains consistent across the board: in order to preserve the operational characteristics of the main component of its steering system. This Rack and Pinion Boot play the crucial role in the efficient functioning of the automobiles steering system, and it determines its durability.

We provide a wide range of Lincoln MKX Rack and Pinion Boot at the best prices possible. If you need Lincoln MKX Rack and Pinion Boot, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Lincoln MKX Rack and Pinion Boot Parts Questions & Experts Answers

Boot
7T4Z-3K661-A
Q: How to replace a steering gear boot on Lincoln MKX?
A: Loosen the lug nuts, raise the vehicle and support it securely on jack stands. Remove the wheel. Remove the tie-rod end and jam nut. Remove the outer rack and pinion boot clamp with a pair of pliers. The outer ends of the rack and pinion boots are secured by band-type clamps; they're easily removed with a pair of pliers. The inner ends are retained by boot clamps which must be cut off and discarded. Cut off the inner boot clamp with a pair of diagonal cutters. Slide off the boot. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with a layer of tape so the small end of the new boot isn't damaged. Slide the new boot into position on the rack and pinion until it seats in the groove in the steering rod and install new clamps. Remove the tape and install the tie-rod end. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque.