How do you remove and install the ignition lock cylinder on Lincoln Navigator?

To remove the ignition lock cylinder it is required that the negative cable be disconnected from the battery followed by disconnecting the positive cable and waiting for 2 minutes. Second, switch the key to the Run position. Use a 1/8 inch punch to push down on the hole located at the bottom of the steering column cover that is surrounding the lock cylinder at the same time pulling on the lock refer to it as cylinder to be able to remove it from the housing of the steering column. For installation, push in the retaining pin located on the side of the lock cylinder and turn the ignition key to the 'Run' position. Place the lock cylinder back into the steering column housing so as to fit into the hole provided and slide in until it locates the interlocking washer appropriately. Twist the key anticlockwise to unlock the retaining pin so that it goes back to it slot at the steering column housing. Last of all, rotate the lock to ensure that the operation is correct in all positions and finally fix the lock in place by reversing all the operations that were followed to remove the lock.

Genuine Lincoln Navigator Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Ignition Lock Cylinders found

View related parts
Lincoln Navigator Cylinder Ignition
Part Number: AU5Z-11582-B
$70.02 MSRP: $130.73
You Save: $60.71 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: SW-6845, SW-6606, SW-6149, 5F9Z-11582-BA, 4L3Z-11582-BB, 7U5Z-11582-B, SW-6390
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Lincoln Navigator | 8 Cyl 5.4L | 4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
- 2005-2010 Lincoln Navigator | 8 Cyl 5.4L | 4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Navigator Cylinder Ignition
Part Number: AU5Z-11582-A
$97.45 MSRP: $133.16
You Save: $35.71 (27%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Lincoln Navigator | 8 Cyl 5.4L | 4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Navigator Lockset - Complete Vehicle
Part Number: 4L3Z-11582-BB
$79.09 MSRP: $130.73
You Save: $51.64 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: AU5Z-11582-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Lincoln Navigator | 8 Cyl 5.4L | 4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Navigator Cylinder - Private Lock
Part Number: 2L2Z-11582-B
$55.00 MSRP: $90.91
You Save: $35.91 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Lock Service Pack - Ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Lincoln Navigator | 8 Cyl 5.4L, 8 Cyl 5.4L DOHC EFI | 4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Navigator Lockset - Complete Vehicle
Part Number: 4L3Z-11582-BC
Product Specifications
- Manufacturer Note: Lock Service Pack - Ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Lincoln Navigator | 8 Cyl 5.4L, 8 Cyl 5.4L DOHC EFI | 4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Lincoln Navigator Ignition Lock Cylinder

Before going any further, it would be pertinent to define the primary role of the product by pointing out that the Ignition Lock Cylinder is located in Lincoln Navigator cars and functions by providing the driver with a key-turning mechanism of the engine crank. This mechanism is connected with the ignition switch, which provides necessary circuits with battery current only if the correct key is inserted. Previous Lincoln Navigator model has simple key-based systems, as well as innovative keyless ignition system improved the vehicle's comfort and anti-theft protection. Previously, previous toolkits employed a column-mounted ignition lock cylinder and key while the later Lincoln Navigator models employ keyless fobs that interface with the car computer for a start button. However, the Ignition Lock Cylinder is not free from problems and may wear out over time thus causing problems in turning the key or starting the car's engine. In total, the development of the Ignition Lock Cylinder in Lincoln Navigator vehicles shows the ongoing struggle between optimisation in terms of the driving experience as well as safety.

We provide a wide range of Lincoln Navigator Ignition Lock Cylinder at the best prices possible. If you need Lincoln Navigator Ignition Lock Cylinder, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Lincoln Navigator Ignition Lock Cylinder Parts Questions & Experts Answers

Lockset - Complete Vehicle
4L3Z-11582-BB
Q: How do you remove and install the ignition lock cylinder on Lincoln Navigator?
A: To remove the ignition lock cylinder it is required that the negative cable be disconnected from the battery followed by disconnecting the positive cable and waiting for 2 minutes. Second, switch the key to the Run position. Use a 1/8 inch punch to push down on the hole located at the bottom of the steering column cover that is surrounding the lock cylinder at the same time pulling on the lock refer to it as cylinder to be able to remove it from the housing of the steering column. For installation, push in the retaining pin located on the side of the lock cylinder and turn the ignition key to the 'Run' position. Place the lock cylinder back into the steering column housing so as to fit into the hole provided and slide in until it locates the interlocking washer appropriately. Twist the key anticlockwise to unlock the retaining pin so that it goes back to it slot at the steering column housing. Last of all, rotate the lock to ensure that the operation is correct in all positions and finally fix the lock in place by reversing all the operations that were followed to remove the lock.