How to remove and install the door latch, handle and door lock cylinder on Lincoln Navigator?

To address the door latch, first raise the window and remove the door trim panel along with the watershield. Next, take out the screws that secure the latch to the door, detach the locking rods and cable, and pull the latch assembly through the access hole. While working through the large access hole, position the latch to disengage the outside door handle and lock cylinder from the latch rods, as well as the inside handle from the latch cable. All door locking rods are attached by plastic clips, which can be removed by unsnapping the portion engaging the connecting rod and pulling the rod out of its locating hole. Adjust the latch to disengage the door lock actuator hook, then remove the latch assembly from the door, with installation being the reverse of removal. For the outside handle and door lock cylinder assembly, raise the window and remove the door trim panel and watershield. Through the large access hole, disengage the plastic clips securing the lock cylinder to the latch rod and the door handle to the latch rod. Disconnect any electrical connectors that may interfere with removal, then remove the outside handle retaining nuts accessible through the access hole in the door frame and pull the handle and lock cylinder assembly from the door, with installation being the reverse of removal. For the inside handle and cable, remove the door trim panel and peel away the watershield. Take out the bolt securing the inside handle and pull rearward to disengage it from the inner door panel. Detach the latch rod from the backside of the handle and remove it from the vehicle, rotating the handle out and detaching the latch rod retaining clip, with installation being the reverse of removal.

Genuine Lincoln Navigator Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Door Lock Cylinders found

View related parts
Lincoln Navigator Lock Cylinder Less Keys
Part Number: 7C3Z-1521990-A
$57.34 MSRP: $83.83
You Save: $26.49 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Position: Passenger Side
- Replaces: F85Z-1521990-BA, 8L3Z-1521990-A, F85Z-1521990-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2014 Lincoln Navigator | 8 Cyl 5.4L, 8 Cyl 5.4L DOHC EFI | 4-Speed Automatic Transmission E4OD(4R100), 4AT 4R100, 4AT E4OD, 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Navigator Lock Cylinder Less Keys
Part Number: 8L3Z-1521990-C
$41.21 MSRP: $59.22
You Save: $18.01 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder
- Position: Passenger Side/Driver Side
- Replaces: CL1Z-7821991-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Lincoln Navigator | 6 Cyl 3.5L GTDI, 8 Cyl 5.4L | 4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Navigator Cylinder Assembly - Lock
Part Number: F8DZ-5406082-AA
$38.70 MSRP: $56.58
You Save: $17.88 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Lock
- Replaced by: 9G1Z-5406082-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Lincoln Navigator | 8 Cyl 5.4L, 8 Cyl 5.4L DOHC EFI | 4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Navigator Cylinder Assembly - Lock
Part Number: F85Z-1521990-BB
$57.34 MSRP: $83.83
You Save: $26.49 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder Less Keys
- Position: Passenger Side
- Replaced by: 7C3Z-1521990-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Lincoln Navigator | 8 Cyl 5.4L | 4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Navigator Lockset - Complete Vehicle
Part Number: FL1Z-7822050-A
$40.68 MSRP: $58.45
You Save: $17.77 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Complete Kit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Lincoln Navigator | 6 Cyl 3.5L GTDI, 8 Cyl 5.4L | 4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Lincoln Navigator Door Lock Cylinder

The Door Lock Cylinder in Lincoln Navigator vehicles is part of the Lincoln electrical system situated inside the front doors that allows to lock and unlock the car with the help of a car key. This mechanism is important in as much as it provides security in accessing the interior cabin, while at the same time allowing the option of easy opening of the door in case the interior cabin is to be accessed. While many models of cars of the present times are headed away from using conventional door lock cylinders, the Lincoln Navigator is among the few that still employ this crucial component. This complications can surely arise due to the strain which is applied on the Door Lock Cylinder during frequent use and thus hammering the doors can also be a tough task. Signs of a faulty cylinder may comprise of a key that cannot twist or freezes. hefore any complication or in the initial stage of failure Lincoln Navigator users should replace the Door Lock Cylinder in order to maintain the functionality and security of the automobile.

We provide a wide range of Lincoln Navigator Door Lock Cylinder at the best prices possible. If you need Lincoln Navigator Door Lock Cylinder, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Lincoln Navigator Door Lock Cylinder Parts Questions & Experts Answers

Lock Cylinder Less Keys
7C3Z-1521990-A
Q: How to remove and install the door latch, handle and door lock cylinder on Lincoln Navigator?
A: To address the door latch, first raise the window and remove the door trim panel along with the watershield. Next, take out the screws that secure the latch to the door, detach the locking rods and cable, and pull the latch assembly through the access hole. While working through the large access hole, position the latch to disengage the outside door handle and lock cylinder from the latch rods, as well as the inside handle from the latch cable. All door locking rods are attached by plastic clips, which can be removed by unsnapping the portion engaging the connecting rod and pulling the rod out of its locating hole. Adjust the latch to disengage the door lock actuator hook, then remove the latch assembly from the door, with installation being the reverse of removal. For the outside handle and door lock cylinder assembly, raise the window and remove the door trim panel and watershield. Through the large access hole, disengage the plastic clips securing the lock cylinder to the latch rod and the door handle to the latch rod. Disconnect any electrical connectors that may interfere with removal, then remove the outside handle retaining nuts accessible through the access hole in the door frame and pull the handle and lock cylinder assembly from the door, with installation being the reverse of removal. For the inside handle and cable, remove the door trim panel and peel away the watershield. Take out the bolt securing the inside handle and pull rearward to disengage it from the inner door panel. Detach the latch rod from the backside of the handle and remove it from the vehicle, rotating the handle out and detaching the latch rod retaining clip, with installation being the reverse of removal.