How to remove and install a speedometer cable on Lincoln Town Car?

On later models, the speedometer is electric, with a signal provided by the Vehicle Speed Sensor (VSS). On these models there is no mechanical speedometer cable. Disconnect the cable from the negative battery terminal. Disconnect the speedometer cable from the transmission or cruise control speed sensor adapter. Models with cruise control adapters have two speedometer cables: one between the transmission and the adapter and one leading from the adapter to the speedometer housing. Detach the cable from the routing clips in the engine compartment and pull the cable up to provide enough slack to allow disconnection from the speedometer. Remove the instrument cluster screws, pull the cluster out, then reach behind it and disconnect the speedometer cable from the back of the cluster by pressing on the cable release clip. Remove the cable from the vehicle. Prior to installation, press a 3/16-inch ball of silicone or equivalent lubricant Into the speedometer opening. Installation is the reverse of removal.

Genuine Lincoln Town Car Speedometer Cable

Speedo Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speedometer Cables found

View related parts
Lincoln Town Car Actuator Assembly
Part Number: 1W1Z-9A825-AA
Product Specifications
- Other Name: Actuator Assy; Actuator Cable, Cable
- Manufacturer Note: NGV
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2006 Lincoln Town Car | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT 4R70W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R70E W/TSS*S/V, 4-Speed Automatic Transmission AODEW/4R75E W/TSS S/V, 4-Speed Automatic Transmission NAAO AODEW/4R70W*S/VIL, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Town Car Speedometer Cable Housing
Part Number: E3FZ17260A
Product Specifications
- Other Name: Cable Assembly Speedometer; Speedometer Cable Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1994 Lincoln Town Car | 8 Cyl 4.6L, 8 Cyl 5.0L | 4AT, 4AT 4R70W, 4AT AOD, 4AT AODE
View related parts
Lincoln Town Car Control Cable Assembly
Part Number: E3MZ-9A820-A
Product Specifications
- Other Name: Cable Assembly - Control
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1983-1990 Lincoln Town Car | 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Town Car Speedometer Cable Kit
Part Number: EOAZ17260B
Product Specifications
- Other Name: Cable Assembly Speedometer
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-2003 Lincoln Town Car | 8 Cyl 4.6L, 8 Cyl 5.0L | 4AT, 4AT 4R70W, 4AT AOD, 4AT AODE

Lincoln Town Car Speedometer Cable

We provide a wide range of Lincoln Town Car Speedometer Cable at the best prices possible. If you need Lincoln Town Car Speedometer Cable, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Lincoln Town Car Speedometer Cable Parts Questions & Experts Answers

Control Cable Assembly
E3MZ-9A820-A
Q: How to remove and install a speedometer cable on Lincoln Town Car?
A: On later models, the speedometer is electric, with a signal provided by the Vehicle Speed Sensor (VSS). On these models there is no mechanical speedometer cable. Disconnect the cable from the negative battery terminal. Disconnect the speedometer cable from the transmission or cruise control speed sensor adapter. Models with cruise control adapters have two speedometer cables: one between the transmission and the adapter and one leading from the adapter to the speedometer housing. Detach the cable from the routing clips in the engine compartment and pull the cable up to provide enough slack to allow disconnection from the speedometer. Remove the Instrument Cluster screws, pull the cluster out, then reach behind it and disconnect the speedometer cable from the back of the cluster by pressing on the cable release clip. Remove the cable from the vehicle. Prior to installation, press a 3/16-inch ball of silicone or equivalent lubricant Into the speedometer opening. Installation is the reverse of removal.