×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Gas Cylinder Block And Plugs fit your 1983 Ford Ranger 4 Cyl 2.3L 5-Speed Manual Transmission
Currently shopping for
1983 Ford Ranger
Change VehicleVehicle Options
4 Cyl 2.3L; 5-Speed Manual TransmissionVehicle Options
4 Cyl 2.3L; 5-Speed Manual TransmissionCategories Close X
Currently selected
Engine
- Camshaft Gear And Bearings
- Crankshaft And Flywheel
- Cylinder Block & Plugs
- Cylinder Block And Related Parts
- Cylinder Head And Related Parts
- Engine Countershaft, Gear, Tensioner And Timing Bolt
- Engine Supports - (Front And Rear)
- Engine Supports - (Front And Rear) Oil Filter And Related Parts
- Engine Supports - (Front And Rear) Oil Pump And Related Parts
- Engine Supports - (Front And Rear) Piston And Connecting Rod
- Engine Supports -(Front And Rear) Gasket Set - Complete
- Engine Supports -(Front And Rear) Oil Cooler
- Engine Supports -(Front And Rear) Oil Pan, Timing Gear Cover And Related Parts
- Engine Supports -(Front And Rear) Valves And Related Parts
- Gas Cylinder Block And Plugs
- Gas Engine Parts - External
- Gas Engine Parts - Intake Manifold
- Gas Engine Parts - Internal-Lower
- Gas Engine Parts - Internal-Upper
- Gas Engine Supports - (Front And Rear)
- Gas Engine Supports - (Front And Rear) Oil Filter (Spin-On Type)
- Gas Engine Supports - (Front And Rear) Oil Pump
- Tensioner And Timing Bolt Engine Front. Upper, Lower Case & Oil Filter
Other Categories
Accelerator Linkage, Air Cleaner & Speed Control
Air Conditioner, Radio & Shock Absorbers
Alternator, Battery, Distributor & Starter
BODY Body
Fenders & Hood
Frame, Exhaust System & Springs
Front Axle & Steering
Fuel System & Manifolds
Lamps & Wiring
Manual Transmission
Radiator & Grill
Rear Axle, Drive & Coupling Shafts
Speedometer, Bumpers, Mirrors & Wipers
Wheels & Brakes
Parts Questions
Sort by:
Recommended
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
Part Description
E3TZ-6A008-A
DOWEL (CYLINDER HEAD TO BLOCK)Dowel - Pin- Require Quantity: 4
- Package Quantity: 4
- Base Number: 6A008
- Callout Name: 6A008
$9.80 $5.734
F1SZ-10884-A
SENDER (WATER TEMPERATURE INDICATOR ENGINE UNIT)Sender Assy - Temperature- *SW-924-#270-incl. green insulator, (6/92) , w/gauges gas
- Base Number: 10884
- Callout Name: 10884
$55.09 $34.541
D4FZ-6A008-A
DOWEL (CYLINDER HEAD)Dowel - Pin- Require Quantity: 2
- Package Quantity: 4
- Base Number: 6A008
- Callout Name: 6A008
$7.42 $5.21
- DOWEL (CYLINDER BLOCK)
D1FZ-6397-B
Sleeve - Guide- Align clutch pressure plate to flywheel
CLUTCH TO FLYWHEEL , M/T
TRANS. SPD:4 - Require Quantity: 3
- Package Quantity: 5
- Base Number: 6397
- Callout Name: 6397
$3.37 $2.365 
EAD-6397-B
Sleeve - Guide- To flywheel housing
to flywheel housing-1/2" x 1 - Require Quantity: 2
- Package Quantity: 4
- Base Number: 6397
- Callout Name: 6397
$2.90 $2.044
- PLUG (ENGINE)
-376099-S
Obsolescence - Policy- (PP-73-A)-plug (cylinder block rear)-cup-3/4" , STANDARD PART
(PP-73-A)-plug (rear hole in block) -cup type-3/4" , STANDARD PART - Callout Name: 6026
- Replaced By: -W720518-S437U
$2.13 $1.244 
D7AZ-6026-A
Plug - Engine- (Core holes in block and cyl. head)-Std. 1.50" O.D.
(Core holes in block or hd.)-1 1/2" O.D.
(Core holes in block or in head) - 1.50" O.D.
Block and cyl. hd.-standard-1 1/2" dia.
Std. 1.50" O.D. - Require Quantity: 4
- Package Quantity: 2
- Callout Name: 6026
- Replaced By: F6AZ-6026-BA
$5.73 $4.022
-87837-S
Plug - Engine- (P-15) (used to plug oil gallery in block) 1/4"-18 r/b F1ZZ 6026-B , STANDARD PART
r/b F1ZZ 6026-B (P-15)-plug (drain holes in block and oil gallery)- pipe-hex. countersunk-1/4"-18 , STANDARD PART
r/b F1ZZ 6026-B (P-15)-plug (oil gallery and drain holes)-pipe-1/4"-18 , STANDARD PART
r/b F1ZZ 6026-B (P-15)-plug (water drain holes and front oil gallery in block)-pipe-1/4"-18 x 27/64" , STANDARD PART
r/b F1ZZ 6026-B (P-15-)-plug (water jacket, air brake compressor oil hole in block, front and rear main oil gallery)- pipe-1/4"-18 , STANDARD PART - Callout Name: 6026
- Replaced By: F1ZZ-6026-B
$3.18 $2.232- -371485-S
Plug - Engine- (PP-48-A)-plug (clean out holes in block)- 3/4-16 pipe-also used in intake manifold , STANDARD PART
(PP-48-A)-plug (clean out holes in cyl. head)-pipe- 3/4"-14 , STANDARD PART
(PP-48-A)-plug (core holes in top of cyl. head)- pipe-3/4"-14 , STANDARD PART
r/b F2ZZ 6026-A (PP-48-A)-plug (clean out holes in hd.)-hex. countersunk hd.-3/4" , STANDARD PART - Require Quantity: 4
- Package Quantity: 1
- Callout Name: 6026
- Replaced By: F2ZZ-6026-A
$18.75 $13.731 
E6DZ-6026-C
Plug - Engine- (Clean out holes in block)-standard 1 5/8"
- Require Quantity: 5
- Package Quantity: 4
- Callout Name: 6026
- Replaced By: 2R3Z-6026-AA
$10.83 $7.614- E7GZ-6026-A
Plug - Expansion- Plug cup - 30mm O.D.
- Require Quantity: 4
- Package Quantity: 1
- Callout Name: 6026
$18.75 $13.731 - -376301-S
Plug - Expansion- (PP-67-A)-plug (air brake compressor oil return hole in block)-cup-1/2" , STANDARD PART
(PP-67-A)-plug (cyl. block oil passage)-cup-1/2" , STANDARD PART
(PP-67-A)-plug (front main oil gallery)-cup type-1/2" , STANDARD PART - Base Number: 376301-S
- Callout Name: 6026
$0.00 
-E450102-S80
Plug- (AP-10-G) Plug (drain holes in block) 1/8"-27 , STANDARD PART
- Require Quantity: 8
- Package Quantity: 1
- Base Number: E450102-S80
- Callout Name: 6026
- C5AZ-6026-J
Plug - Engine- (Holes in cyl. head and block)-standard 2.078" O.D.
(Holes in rear of block)-Standard 2.078" O.D.-cup - Base Number: 6026
- Callout Name: 6026
C8SZ-6026-A
Plug - Engine- (OIL GALLERY IN BLOCK)-5/16"-18
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 6026
- Callout Name: 6026
- C9AZ-6026-A
Plug - Engine- (Distributor oil access hole in block)-standard .259" O.D.
- Base Number: 6026
- Callout Name: 6026
- BOLT (CRANKSHAFT MAIN BEARING CAP)
D9HZ-6345-A
Bolt- Stud-3/8" - 16-1/2"-13 x 5"-hex shoulder- also attaches oil pump screen tube and cover assy.
- Base Number: 6345
- Callout Name: 6345
$34.42 $24.162 
C2OZ-6345-A
Bolt - Bearing Cap- 7/16"-14 x 3 5/32" -hex. head-7/16"
- Require Quantity: 9
- Package Quantity: 1
- Callout Name: 6345
- C6TZ-6345-C
Bolt - Bearing Cap - Hex. Head- Stud (attach oil pump screen to bearing cap)- 3/8"-16 x 7/16"-14 x 4 3/32"
- Base Number: 6345
- Callout Name: 6345
- D4FZ-6345-A
Bolt - Bearing Cap - Hex. Head- M12-1.75
- Require Quantity: 9
- Package Quantity: 1
- Base Number: 6345
- Callout Name: 6345
$10.67 $7.498
C9AZ-6890-A
INSERT (OIL FILTER MOUNTING BOLT)Insert- Used in oil filter to block mounting
- Base Number: 6890
- Callout Name: 6890
$0.00
E3TZ-6397-C
DOWEL (CYLINDER BLOCK TO FLYWHEEL HSG.)Sleeve - Guide- Require Quantity: 2
- Package Quantity: 4
- Base Number: 6397
- Callout Name: 6397
- Replaced By: 6L2Z-6397-AA
$22.60 $13.221
B9AE-6A008-A
DOWEL (CYLINDER HEAD TO CYLINDER BLOCK)Dowel- Require Quantity: 4
- Package Quantity: 4
- Base Number: 6A008
- Callout Name: 6A008
- C2OZ-6A008-A
DOWEL (CYLINDER HEAD TO CYLINDERDowel- 7/16" height x 9/16" I.D. x 43/64" O.D.-split
DOWEL (CYLINDER HEAD TO CYLINDER BLOCK)-35/64" I.D. x 43/64" O.D.-7/16" long-split - Base Number: 6A008
- Callout Name: 6A008
D4FZ-6A753-A
BEARING (AUXILIARY DRIVE SHAFT FRONT)Bearing Aux Drive Shft- Std.-1.658" I.D.
- Base Number: 6A753
- Callout Name: 6A753
Genuine Ford Parts, the Right Choice
FordPartsGiant.com offers the wholesale prices for genuine 1983 Ford Ranger parts. Parts like Gas Cylinder Block And Plugs are shipped directly from authorized Ford dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options. Engine: 4 Cyl 2.3L. Transmission: 5MT.