×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Warner T45 fit your 1998 Ford Mustang 8 Cyl 4.6L 5-Speed Manual Transmission
Currently shopping for
1998 Ford Mustang
Change VehicleVehicle Options
8 Cyl 4.6L; 5-Speed Manual TransmissionVehicle Options
8 Cyl 4.6L; 5-Speed Manual TransmissionCategories Close X
Currently selected
Manual Transmission
Other Categories
Accelerator Linkage, Air Cleaner & Speed Control
Air Conditioner, Radios & Shock Absorbers
Alternator, Regulator, Battery, Starter & Distributor
Body Front & Floor
Body Sides & Quarter
EM Exterior Moulding
Engine
Fenders & Hood
Frame, Exhaust System, Spring & Stabilizer
Front Suspension & Steering
Fuel System & Manifolds
IT Interior Trim Parts
Lamps & Wiring
Radiator & Grill
Rear Axle & Drive Shaft
Roof, Back, Luggage Compartment & Tailgate
SM Body Sheet metal
Seats
Speedometer, Bumpers, Mirrors & Wipers
Wheels & Brakes
Parts Questions
Sort by:
Recommended
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
Part Description
- GEAR (SPEEDOMETER DRIVE AND DRIVEN GEAR)
DOOZ-17271-B
Gear - Driven- Driven gear, 3.27 rear axle - auto - P225/55HR16, P245/45ZR17
- Fit Note: 8 Cyl 4.6L
- Base Number: 17271
- Callout Name: 17271
$3.34 $2.342 
CODZ-17271-B
Gear - Driven- Driven gear, 3.27 rear axle - manual Cobra
- Fit Note: 8 Cyl 4.6L
- Base Number: 17271
- Callout Name: 17271
$5.31 $3.732
C4OZ-17271-A
Gear - Driven- Driven gear, 3.27 rear axle - manual exc. Cobra - P225/55HR16, P245/45ZR17
- Fit Note: 8 Cyl 4.6L
- Base Number: 17271
- Callout Name: 17271
$5.18 $3.641
CODD-17271-B
Gear - Driven- Driven gear, 2.73 rear axle - manual - P205/65R15, P225/55HR16
Driven gear, 2.73 rear axle - manual - P225/55HR16, P245/45ZR17 - Fit Note: 8 Cyl 4.6L
- Base Number: 17271
- Callout Name: 17271
$6.85 $4.811
C8SZ-17271-B
Gear - Driven- Driven gear, 3.08 rear axle - auto - P225/55HR16, P245/45ZR17
- Fit Note: 8 Cyl 4.6L
- Base Number: 17271
- Callout Name: 17271
$5.47 $3.841
C7SZ-17271-C
Gear - Driven- Driven gear, 2.73 rear axle - auto - P205/65R15
- Fit Note: 8 Cyl 4.6L
- Base Number: 17271
- Callout Name: 17271
$3.39 $2.382
E3ZZ-17285-A
Gear - Speedometer- Drive gear, 2.73 rear axle - manual - P205/65R15, P225/55HR16
- Fit Note: 8 Cyl 4.6L
- Base Number: 17285
- Callout Name: 17271
E9LZ-9E731-A
SENSOR ASY. (SPEED)Sensor Assy - Engine Speed- #E9LF-AA, w/ factory installed speed control
- Fit Note: 6 Cyl 3.8L, 8 Cyl 4.6L
- Base Number: 9E731
- Callout Name: 9E731
$285.45 $172.701
- CASE ASY.
-N606067-S2
Bolt- Bolt (case to engine) M10 - 1.50 x 75 (metric)
- Callout Name: 7005
- Replaced By: -N606067-S439
$29.40 $17.204 
-N605935-S2
Bolt- (AB-116-M) BOLT (7005 TO 6392) M12 X 1.75 X 44.5 (METRIC)
- Require Quantity: 4
- Package Quantity: 1
- Base Number: HB1
- Callout Name: 7005
$26.60 $15.561
-N606065-S2
Bolt- (AB-187-KB) bolt (case to engine) - M10-1.50 x 65 (metric)
- Callout Name: 7005
- Replaced By: -W710658-S439
$15.50 $9.074
-87675-S
Plug - Oil Filler- (P-17) PLUG (FILLER) 1/2" PIPE
- Require Quantity: 2
- Package Quantity: 15
- Base Number: 87675-S
- Callout Name: 7005
$5.64 $3.9715
-87650-S
Plug - Blanking - Threaded- (P-12) plue (reqd. to plug front pump, direct cl., forward & throttle valve-pressure holes in case-dry seal - 1/8"-27
- Base Number: 87650-S
- Callout Name: 7005
-N807381-S2
Stud- (AW-91-BM) Stud and washer (case to engine) M6-1.0 x M8-1.25 x 50mm (metric)
- Callout Name: 7005
- F7AZ-7005-A
Case Assy - Transmission- See TSB 96-7-14, May also require 3L3Z-7H398-AA plug and W700005-S309 retainer
- Base Number: 7005
- Callout Name: 7005
- HOUSING ASY. (FLYWHEEL)-N606067-S2
Bolt- 32V , Bellhousing to Engine bolts, M10x75, M/T
- Fit Note: 8 Cyl 4.6L
- Require Quantity: 2
- Package Quantity: 4
- Callout Name: 6392
- Replaced By: -N606067-S439
$29.40 $17.204 - -N606065-S2
Bolt- 16V , Bellhousing to Engine bolts, M10x65, M/T
- Fit Note: 8 Cyl 4.6L
- Require Quantity: 5
- Package Quantity: 4
- Callout Name: 6392
- Replaced By: -W710658-S439
$15.50 $9.074
$14.17 $9.952
- ARM ASY. (CONTROL SELECTOR)
$50.50 $27.721 
-357479-S15
Hardware - Miscellaneous- (NN-108) pin (7302 to 7358) 3/16" x 1"
- Callout Name: 7302
- Replaced By: AR3Z-7B096-A
$14.72 $10.331
F6ZZ-7030-A
Snap Ring- (2) required at 7025 reverse driven quarter bearing & tone wheel (1) required at 7124 reverse synchronizer, (1) required between 7738 & 7025
- Require Quantity: 4
- Package Quantity: 3
- Base Number: 7030
- Callout Name: 7030
$8.73 $5.623
E6ZZ-7124-A
SYNCHRONIZER ASY. 3RD & 4TH SPEEDSynchronizer Assy - 3rd And 4th Spd- Callout Name: 7124
- Replaced By: 8R3Z-7124-BA
- FORK (GEARSHIFTER)-357479-S15
Hardware - Miscellaneous- (NN-108) pin (7230 5th/reverse to 7242) 3/16" x 1"
(NN-108) pin (retain 5th speed fork to 7240 rail) 3/16" x 1" - Callout Name: 7230
- Replaced By: AR3Z-7B096-A
$14.72 $10.331 
- F6ZZ-7230-C
Fork - 5th Speed And Reverse- 5th and reverse - nominal fork, no ID on fork, GT/Cobra - use on F8ZC-7003-AA, F8ZC-7003-BA and later models
5th and reverse - see SSM# 11393 - Base Number: 7230
- Callout Name: 7230
- F8ZZ-7230-DE
Fork - Gear Shift- 5th & reverse, short fork, ID (S) on fork, GT/Cobra - use on F8ZC-7003-AA, F8ZC-7003-BA and later models
- Base Number: 7230
- Callout Name: 7230
- F8ZZ-7230-EA
Fork - Gear Shift- 5th & reverse, long fork, ID (L), GT/Cobra - use on F8ZC-7003-AA, F8ZC-7003-BA and later models
- Base Number: 7230
- Callout Name: 7230
- $14.72 $10.331
- SHAFT (REVERSE IDLER GEAR)-357479-S15
Hardware - Miscellaneous- (NN-108) PIN (7140 TO 7005) 3/16" X 1"
- Callout Name: 7140
- Replaced By: AR3Z-7B096-A
$14.72 $10.331 
- LEVER ASY. (GEARSHIFT OFFSET)-357479-S15
Hardware - Miscellaneous- (NN-108) PIN (7F018 TO 7358) 3/16" X 1"
- Callout Name: 7F018
- Replaced By: AR3Z-7B096-A
$14.72 $10.331 
- SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART
DOTZ-17285-A
Gear - Speedometer- Teeth: 6, I.D.: 1 3/4., O.D.: 2.00, Length: 11/16 , Material: Nylon, Color: Green
- Callout Name: 17285
$41.71 $30.521 - E5FZ-17285-A
GEAR-TRNS SPEEDO DRI- Teeth: 26, I.D.: 2 13/16, O.D.: 3 1/2, Length: 1/2, Material: Nylon, Color: Lt. Blue
- Callout Name: 17285
$18.75 $13.731 
C8OZ-17285-B
Gear - Speedometer- Teeth: 8, I.D.: 1 3/8, O.D.: 2 1/64, Length: 11/16, Material: Nylon, Color: Brown
- Callout Name: 17285
- Replaced By: F7TZ-17285-AA
- E3ZZ-17285-A
Gear - Speedometer- Teeth: 7, I.D.: 1 3/32, O.D.: 2.00, Length: 11/16, Material: Nylon, Color: Yellow
- Base Number: 17285
- Callout Name: 17285
E3ZZ-17285-B
Gear - Speedometer- Teeth: 6, I.D.: 1 3/32, O.D.: 2.00, Length: 11/16, Material: Nylon, Color: Black
- Callout Name: 17285
- E6DZ-17285-A
Gear - Speedometer- Teeth: 7, I.D.: 17/32, O.D.: 1 31/32, Length: 17/32, Material: Nylon, Color: None
- Base Number: 17285
- Callout Name: 17285
$0.00
- HOUSING (EXTENSION)
F3LY-7A039-A
Housing - Transmission Extension- 10" long, Use F2UZ-7H183-A plug if required for sensor hole
- Base Number: 7A039
- Callout Name: 7A039
$310.00 $210.181 
-E800152-S72
Screw- (AB-119-F) BOLT (7A039 TO 7005) HEX WASHER HEAD-M10 X 30.0 (METRIC)
- Require Quantity: 8
- Package Quantity: 4
- Base Number: E800152-S72
- Callout Name: 7A039
$3.25 $1.914
-N605788-S2
Bolt M8 1.25X30 Hex- (AB-118-EJ)-bolt (hsg.to case) hex flange head-M8-1.25 x 30 (Metric)
- Require Quantity: 6
- Package Quantity: 1
- Base Number: N605788-S2
- Callout Name: 7A039
- F8ZZ-7A039-BB
Housing - Transmission Extension- 45 degree angle speedo hole , 4.6L 2Valve
- Callout Name: 7A039
- BOOT (TRANSMISSION GEARSHIFT LEVER)
-N605892-S55
Bolt - Hex.Head- (AB-175-GP) - bolt, hex. head - M6x1x22.5 - (attach 7277 to floor pan)
- Require Quantity: 4
- Package Quantity: 4
- Callout Name: 7277
- Replaced By: -N605892-S437
$4.25 $2.494 
-N806886-S301
Nut - Hex.- (AM-63-CH) - nut, hex. head - M6x1 - (attach 7277 to floor pan)
- Require Quantity: 4
- Package Quantity: 4
- Base Number: HN
- Callout Name: 7277
- Replaced By: -N806886-S439
$3.25 $1.914
F4ZZ-7277-B
Boot - Gear Change Lever- Inner boot - rubber boot with hexagonal plate and 4 bolt holes that attaches to the body, Cobra - DOHC
Inner boot - rubber boot with hexagonal plate and 4 bolt holes that attaches to the body, GT - SOHC - Fit Note: 8 Cyl 4.6L
- Callout Name: 7277
- Replaced By: 3R3Z-7277-AA
B7A-4621-A
CONE AND ROLLERBearing Assy - Driving Pinion- M88048, Outer Bearing, 7.5 and 8.8
- Base Number: 4621
- Callout Name: 4621
$18.00 $12.641
- STUD (CLUTCH RELEASE LEVER)
$45.17 $30.891 
- SEAL (INPUT SHAFT AND EXTENSION HOUSING)
$14.17 $9.951 
$22.17 $15.161
$14.17 $9.951
- BEARING ASY.
FOTZ-7025-B
Bearing Assy - Roller- Reverse driven gear bearing (7C238)
- Base Number: 7025
- Callout Name: 7025
$22.00 $15.051 
$11.00 $7.591
- RING (SYNCHRONIZER BLOCKING)
D4ZZ-7107-B
Ring - 5th Speed Synchro. Blockg- 5th and reverse - #1332-091-002
- Base Number: 7107
- Callout Name: 7107
$21.99 $16.091 
E5ZZ-7107-C
Ring - Synchronizer- 3rd & 4th speed
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7107
- Callout Name: 7107
$40.16 $29.391- E5ZZ-7107-A
Ring - Synchronizer- 1st & 2nd speed
- Require Quantity: 2
- Package Quantity: 1
- Callout Name: 7107
- Replaced By: F6ZZ-7107-D
- F6ZZ-7107-A
Ring - Synchronizer- 1st and 2nd speed , 98MM O.D., 79MM I.D., 42 teeth
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7107
- Callout Name: 7107
- F6ZZ-7107-B
Ring - Synchronizer- 3rd and 4th speed - 84MM O.D., 65MM I.D., 36 teeth, GT - 4.6L - SOHC
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7107
- Callout Name: 7107
- F6ZZ-7107-C
Ring - Reverse Gear- 5th and reverse - 70MM O.D., 51MM I.D. 30 teeth
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7107
- Callout Name: 7107
- F6ZZ-7107-DA
Ring - Synchronizer- 3rd and 4th speed - carbon fiber lining, Cobra - 4.6L -DOHC
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7107
- Callout Name: 7107
$18.75 $13.731
F4ZZ-7277-C
BOOT (GEARSHIFT LOWER)Boot - Gear Change Lever- Approximately 4" round rubber boot that fits on the transmission
- Callout Name: 7277
- Replaced By: 1R3Z-7277-AA
$46.67 $25.621
E5ZZ-7124-B
SYNCHRONIZER ASY. 5TH SPEEDSynchronizer Assy - 5th Speed- Callout Name: 7124
- Replaced By: 8R3Z-7124-CA
- PIN (REVERSE GEARSHIFT LEVER PIVOT)
-371197-S
Ring 7/16 Retaining- (XX-16-FE) RETAINING RING - 7/16" DIA.
- Callout Name: 7K024
- Replaced By: F6ZZ-7348-A
$4.38 $3.083 
$29.00 $20.361
- INSERT (GEARSHIFT FORK)
F6ZZ-7L082-A
Insert - Gear Change Fork- 1st, 2nd, 3rd, 4th
- Require Quantity: 2
- Package Quantity: 1
- Callout Name: 7L082
- Replaced By: 1R3Z-7L082-AA
$9.70 $6.811 
D8ZZ-7L082-A
Insert - Gear Change Fork- #BRIGHT BLUE OR WHITE - 3RD,4TH,5TH AND REVERSE
5th and reverse - Require Quantity: 2
- Package Quantity: 4
- Base Number: 7L082
- Callout Name: 7L082
- FORK (GEAR SHIFTER)$43.54 $31.341
$31.91 $23.351
- LEVER ASY. (REVERSE GEARSHIFT)
F2ZZ-7K002-A
Lever - Reverse Gear Relay- LEVER ASY. (REVERSE GEARSHIFT)
- Base Number: 7K002
- Callout Name: 7K002
$71.25 $51.291 - $0.00
- BEARING ASY. (OUTPUT SHAFT)
F6ZZ-7065-AA
Bearing Assy - Ball- CUP & BEARING - REPLACES B5A 1201-A, C6TZ 7169-A
- Base Number: 7065
- Callout Name: 7065
$76.82 $56.221 
$14.42 $10.121
$22.17 $15.161
- LEVER (FLOOR-MOUNTED TRANSMISSION GEARSHIFT)
-N803948-S100
Bolt- (AB-39-D) - bolt, hex. head - M8x1.25x36 - (attaches 7210 upper to 7210 lower)
- Require Quantity: 2
- Package Quantity: 1
- Base Number: HB1
- Callout Name: 7210
$18.75 $13.731 
- SPRING (SYNCHRONIZER BLOCKING)
E5ZZ-7109-A
Spring - Synchronizer- 1st & 2nd speed, 3rd & 4th speed
5th and reverse - Require Quantity: 2
- Package Quantity: 1
- Base Number: 7109
- Callout Name: 7109
$10.74 $7.731 - D4ZZ-7109-A
Spring - Synchronizer- 5th speed
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7109
- Callout Name: 7109
- F6ZZ-7109-A
Spring - Synchronizer- 1st and 2nd speed
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7109
- Callout Name: 7109
- F6ZZ-7109-B
Spring - Synchronizer- 3rd and 4th speed
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7109
- Callout Name: 7109
- SHIM
E5ZZ-7L172-A
Kit - Washers- Counter shaft bearing preload, select-fit set,
- Base Number: 7L172
- Callout Name: 7L172
$359.72 $258.951 
E3ZZ-7L172-A
Kit - Washers- Input shaft bearing preload, select-fit set
- Base Number: 7L172
- Callout Name: 7L172
E9TZ-7C430-A
INSERT (GEARSHIFT FORK)Pad- Reverse
- Require Quantity: 2
- Package Quantity: 4
- Base Number: 7C430
- Callout Name: 7C430
$2.84 $2.004
- GEAR ASY. (REVERSE IDLER)
$74.46 $53.601 
- GEAR (COUNTERSHAFT CLUSTER)
$198.04 $144.941 - F4ZZ-7113-A
Gear - Countershaft Drive- 31 teeth in 3rd gear position , With tag# F4ZR,AC ONLY
- Callout Name: 7113
- FOZZ-7113-A
Gear - Countershaft- 29 Teeth in 3rd gear position, With trans tag #'s E9ZR-A, F2ZR-AA, F3ZR-AA, F4ZR-CA,DA
- Callout Name: 7113
$15.83 $11.121
F6ZZ-7175-A
CONE (1ST & 2ND SPEED - INNER)Ring - Tr. 2nd Syn. Blocking- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7107C
- Callout Name: 7175
$22.69 $16.601
$4.38 $3.083
F6ZZ-7A010-A
PLUG (FILL/DRAIN) (CASE)Plug- Required in 7A039 housing
- Require Quantity: 2
- Package Quantity: 1
- Callout Name: 7A010
- Replaced By: 1R3Z-7A010-AA
$11.67 $8.191
F6ZZ-7N168-A
BEARING ASY. (REVERSE DRIVEN GEAR)Bearing Assy - Needle- Callout Name: 7N168
- Replaced By: AR3Z-7P083-A
$19.50 $13.461
- SNAP RING (INPUT/OUTPUT SHAFT BEARING)
- F6ZZ-7064-A
Snap Ring- (1) required 7124 3rd and 4th speed synchronizer
(1) required 7127 1st speed gear bearing - Require Quantity: 2
- Package Quantity: 1
- Base Number: 7064
- Callout Name: 7064
- INSERT (SYNCHRONIZER HUB)
D4ZZ-7A044-A
Insert- 5th speed
- Require Quantity: 3
- Package Quantity: 1
- Base Number: 7A044
- Callout Name: 7A044
- E4ZZ-7A044-A
Insert- 3rd and 4th , 5th and reverse synchronizer
INSERT (SYNCHRONIZER HUB) - Require Quantity: 3
- Package Quantity: 1
- Base Number: 7A044
- Callout Name: 7A044
E5ZZ-7A044-A
Insert - Synchronizer- Require Quantity: 3
- Package Quantity: 3
- Base Number: 7A044
- Callout Name: 7A044
- F6ZZ-7A044-A
Insert - Synchronizer- 1st and 2nd synchronizer
- Require Quantity: 3
- Package Quantity: 1
- Base Number: 7A044
- Callout Name: 7A044
E3ZZ-7234-B
SPRING (DETENT)Spring- OFFSET LEVER - 1 3/8" - FREE LENGTH - 23/64" O.D.
Offset lever - 1 3/8" - free length - 23/64" OD - Base Number: 7234
- Callout Name: 7234
E3ZZ-7A443-A
SCREW/BOLT (GEAR SHIFT LEVER TO EXTENSION HOUSING)Bolt- SELF TAPPING BOLT
- Require Quantity: 4
- Package Quantity: 1
- Base Number: 7A443
- Callout Name: 7A443
- GEAR (FIRST SPEED)
- BEARING ASY. (1ST SPEED GEAR)
E5ZZ-7160-A
RING (1ST & 2ND SPEED SYN. RETAINING)Ring - Retaining- Base Number: 7064B
- Callout Name: 7160
E5ZZ-7174-A
CONE ASY. (1ST & 2ND SPEED SYN.-OUTER)Cone- Require Quantity: 2
- Package Quantity: 1
- Callout Name: 7174
- Replaced By: F6ZZ-7107-D
E5ZZ-7175-A
CONE (1ST & 2ND SPEED SYN.-INNER)Cone- Require Quantity: 2
- Package Quantity: 1
- Callout Name: 7175
- Replaced By: F6ZZ-7107-D
E5ZZ-7210-A
LEVER (GEAR SHIFT)Lever - Gear Shift- Also part of 7003 trans., exc. "Cobra"
- Callout Name: 7210
- Replaced By: F4ZZ-7210-B
- BEARING ASY. (2ND & 3RD SPEED GEAR)
- GEAR (FIFTH SPEED DRIVEN)
- GEAR (THIRD SPEED)
- SHAFT ASY. (GEARSHIFT)
$0.00 
- VENT
$14.78 $10.38
- SHAFT (INPUT)
F4ZZ-7025-A
BEARING ASY. (INPUT SHAFT - TAPERED ROLLER)Bearing- BEARING - INCLUDES BEARING AND RACE - INPUT SHAFT FRONT - SUPPORTS 7017 IN 7050
- Base Number: 7025
- Callout Name: 7025
- GEAR (SECOND SPEED)
F4ZZ-7102-A
Gear - Mainshaft 2nd Speed- Borg,Warner#1352,080,060 , 30 helical teeth, 23 cluster teeth , 6 cyl.
- Callout Name: 7102
F4ZZ-7210-B
LEVER (GEARSHIFT)Lever - Gear Shift- Lower shift lever assembly, "Cobra"
Mounting plate, pivot and stub lever , bolts to transmission - Base Number: 7210
- Callout Name: 7210
- F4ZZ-7L082-A
INSERT (GEAR SHIFT FORK)Insert - Gear Change Fork- 1st & 2nd speed
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7L082
- Callout Name: 7L082
F6ZZ-7050-B
RETAINER (INPUT SHAFT BEARING)Retainer - Main Drive Gear Bearing- Two-piece welded design, with steel barrel
- Callout Name: 7050
- Replaced By: XR3Z-7050-AA
- F6ZZ-7050-C
RETAINER (RELEASING BEARING GUIDE)Retainer - Main Drive Gear Bearing- For 1999, PIA with 6392
- Base Number: 7050
- Callout Name: 7050
- SYNCHRONIZER ASY.
F6ZZ-7124-D
Synchronizer Assy - 5th Spd & Rev.- 5th and reverse - mounted on countershaft
- Base Number: 7124
- Callout Name: 7124
F6ZZ-7144-A
GEAR (5TH SPEED DRIVE)Gear - Countershaft Cluster- 63 teeth, 4.6L SOHC & DOHC
- Base Number: 7144
- Callout Name: 7144
- F6ZZ-7174-A
CONE ASY. (1ST & 2ND SPEED SYNCHRONIZER - OUTER)Cone- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7174
- Callout Name: 7174
F6ZZ-7242-A
RAIL (REVERSE GEAR SHIFTER)Rod - Gear Change- RAIL (REVERSE GEAR SHIFTER)
- Base Number: 7242
- Callout Name: 7242
- F6ZZ-7738-A
KIT (REVERSE DRIVEN GEAR THRUST WASHER)Washer - Thrust- Kit - five selective thrust washers necessary to set end play of reverse driven gear
- Base Number: 7738
- Callout Name: 7738
- F6ZZ-7A443-A
SCREW/BOLT (GEARSHIFT LEVER TO EXTERNAL HOUSING)Bolt- Require Quantity: 4
- Package Quantity: 1
- Callout Name: 7A443
F6ZZ-7A771-A
BOLTBolt - Hex.Head- (12) required to attach 6392 to 7005, (11) required to attach 7A039 to 7005
- Base Number: 7A771
- Callout Name: 7A771
- F6ZZ-7E139-A
BEARING ASY. (IDLER GEAR)Bearing - Idler Gear- BEARING ASY. (IDLER GEAR)
- Base Number: 7E139
- Callout Name: 7E139
- F6ZZ-7E254-A
WASHER THRUST (REVERSE DRIVE GEAR THRUST)Washer - Thrust- Base Number: 7E254
- Callout Name: 7E254
F6ZZ-7K315-A
PIN (LOCATING)Pin - Locating- (2) required in 7005 case and (2)required in 6392 housing
- Base Number: 7K315
- Callout Name: 7K315
- SHIM KIT INPUT SHAFT BEARING - SELECT FITF6ZZ-7L172-A
Kit - Washers- Shim set (select fit); Input shaft bearing.
- Base Number: 7L172
- Callout Name: 7L172
F6ZZ-7N011-A
BOLT (REVERSE IDLER SHAFT BRACKET)Bolt - Hex.Head- Require Quantity: 3
- Package Quantity: 1
- Callout Name: 7N011
- Replaced By: 1R3Z-7C211-AA
F6ZZ-7N232-A
PLATE (GEARSHIFT SELECTOR ARM)Plate- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7N232
- Callout Name: 7N232
$0.00
F6ZZ-7W425-A
BUSHING (SHIFT RAIL)Bushing- Require Quantity: 3
- Package Quantity: 1
- Base Number: 7W425
- Callout Name: 7W425
- F6ZZ-7Z491-A
WASHER (SYNCHRONIZER THRUST)Washer- Required both sides 1st and 2nd synchronizer
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 7N037
- Callout Name: 7Z491
Genuine Ford Parts, the Right Choice
FordPartsGiant.com offers the wholesale prices for genuine 1998 Ford Mustang parts. Parts like Warner T45 are shipped directly from authorized Ford dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options. Engine: 8 Cyl 4.6L. Transmission: 5MT.