Ford YS4Z-6028-AA Engine Mounting Bracket

You can Select Your Vehicle to check if YS4Z-6028-AA fits your vehicle.

Rubber preservative should be applied to the mounts to slow deterioration.

1. Mark the positions of the three bolts relative to the mount plate. 2. Unscrew the three bolts securing the mount to the inner fender and the two nuts securing it to the engine. 3. Lift off the mount completely.

The engine mounts can be removed if the weight of the engine/transaxle is supported by one of the following methods: 1. Support from underneath using a jack and a suitable piece of wood. 2. Support from above by attaching a hoist to the engine. 3. Use a suitable engine support fixture rented with end pieces engaging in the water channel on each side of the hood opening.

Yes, separate mounts may be removed and installed individually. However, if more than one is disturbed at a time, such as when the engine/transmission unit is removed from its mounts, they must be reassembled and their fasteners tightened in the position marked on removal.

Undo the retaining clip from the air intake hose, then lift the complete air cleaner assembly and remove it from the vehicle.