Ford F87Z-17757-GA Bumper

You can Select Your Vehicle to check if F87Z-17757-GA fits your vehicle.

Installation is the reverse of removal with the following additions: If you're installing a new bumper, transfer the brackets, stone deflector, and any additional items to the new bumper. When installing the step pad, start at the locator hole at the center of the bumper. Loosely install the bumper fasteners, then adjust the bumper position so there is a 3/4-inch horizontal gap between the bumper and body. Tighten the fasteners securely after adjustment.

Installation is the reverse of the removal steps with the following additions: If you're installing a new bumper, transfer the license plate holder and any additional trim items to the new bumper. The bumper can be adjusted by repositioning the fasteners in the brackets. Tighten the fastener nuts securely.