Ford 2W7Z-2A635-DA Cable Assy - Parking Brake

You can Select Your Vehicle to check if 2W7Z-2A635-DA fits your vehicle.

For the intermediate and rear cables on 1990 and later models, ensure the parking brake is released, raise the rear of the vehicle, support it on jackstands, disconnect the rear cable (following specific procedures based on brake type), disconnect the left rear cable from the intermediate cable, and disconnect the right rear cable from the intermediate cable.

For the transverse cable, remove the cable adjusting nut first, followed by disconnecting the cable ends at the right rear of the transverse cable and the intermediate cable. Remove any retaining clips or brackets, take out the cable, reinstall the retaining clips or brackets holding the cable to the body, reconnect the cable ends, and reinstall the adjusting nut.