Ford F3AZ-2A635-A Cable Assembly - Parking

You can Select Your Vehicle to check if F3AZ-2A635-A fits your vehicle.

For the intermediate and rear cables on 1990 and later models, ensure the parking brake is released, raise the rear of the vehicle, support it on jackstands, disconnect the rear cable (following specific procedures based on brake type), disconnect the left rear cable from the intermediate cable, and disconnect the right rear cable from the intermediate cable.

To replace the front cable on 1988 and 1989 models, raise the vehicle and support it on jackstands. Release the parking brake, loosen the adjusting nut at the adjuster, disconnect the cable from the adjuster bracket, remove the clip retaining the cable to the body, disconnect the cable from the pedal assembly inside the vehicle, and finally, remove the cable down through the floorpan.