Make sure this part fits

Ford F8VZ-2B121-AA Brake Caliper Assembly-Less Pads

1998-2006 Ford F8VZ2B121AA

Customer Questions & Expert Answers (4)
Ford F8VZ-2B121-AA Brake Caliper Assembly-Less Pads
  • Part Description
    Caliper Assy - Brake - Less Pads
  • Position
    Driver Side
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Manufacturer Part NumberF8VZ-2B121-AA, F8VZ2B121AA
    Part DescriptionCaliper Assy - Brake - Less Pads
    Item Dimensions4.9 x 7.1 x 9.8 inches
    Item Weight11.00 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUF8VZ-2B121-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1998-2000 Ford Crown Victoria8 Cyl 4.6L4AT 4R70W
    2006, 1998-2000 Lincoln Town Car8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R70E W/TSS*S/V, 4-Speed Automatic Transmission AODEW/4R75E W/TSS S/V, 4-Speed Automatic Transmission NAAO AODEW/4R70W*S/VIL, 4AT 4R70W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    1998-2000 Mercury Grand Marquis8 Cyl 4.6L4AT 4R70W
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if F8VZ-2B121-AA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How do you start overhauling the front calipers for the 1993 Lincoln Town Car? Posted by Customer
    A:
    To overhaul the front calipers and 1989 and later Town Car rear calipers, start by raising the vehicle, supporting it on jackstands, and removing the wheels. Disconnect the brake hose banjo bolt and detach the hose from the caliper, ensuring no air enters the hydraulic control unit on ABS-equipped models. Clean the caliper exterior with brake system cleaner and place it on a clean workbench. Use compressed air with caution to remove the piston from the caliper and proceed to remove the dust boot and piston seal. Inspect the piston and caliper bore for damage, corrosion, or wear. Clean all parts with brake system cleaner and reassemble with new seals, bolt insulators, and caliper bolts if necessary. Lubricate with brake fluid and install the piston, dust boot, and caliper bolt insulators. Finally, follow the caliper installation procedure, connect the brake hose, bleed the brakes, and test the brake operation before placing the vehicle into normal service.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Brake Caliper
    Q:
    What steps should be taken during the reassembly of the caliper, and what should be ensured with new parts for the 1995 Mercury Grand Marquis? Posted by Customer
    A:
    Reassemble the caliper with new parts, ensuring proper lubrication and positioning of seals and boots. Check the piston fit in the bore and install the bleeder valve securely.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Brake Caliper
    Q:
    What steps should be taken during the reassembly of the caliper, and what should be ensured with new parts for the 2007 Ford Crown Victoria? Posted by Customer
    A:
    Reassemble the caliper with new parts, ensuring proper lubrication and positioning of seals and boots. Check the piston fit in the bore and install the bleeder valve securely.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Brake Caliper
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part F8VZ-2B121-AA, the Right Choice

To ensure reliability, purchase Ford part # F8VZ-2B121-AA Brake Caliper Assembly-Less Pads. It is sometimes referred to as Ford Brake Caliper. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Crown Victoria models. It fits Lincoln Town Car. It also fits Mercury Grand Marquis.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford F8VZ2B121AA Brake Caliper Assembly-Less Pads. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly