Ford 6S4Z-17K835-DBPTM Cover

You can Select Your Vehicle to check if 6S4Z-17K835-DBPTM fits your vehicle.

1. Chock the front wheels, jack up the rear of the vehicle, and support it on axle stands. 2. Open the liftgate and the two pockets on the side panels. 3. Remove the two screws from the top of the plastic First Aid kit holder in the right-hand pocket, then unclip it. 4. Unclip the plastic tray from inside the left-hand pocket and undo the bumper securing nut from behind the trim. 5. Remove the four retaining screws from the upper part of the bumper cover. 6. Remove the screws securing the fenderwell liners to the rear bumper cover. 7. Undo the securing nuts behind the fenderwell liners at each corner of the bumper cover and pull off the rubber bumpers. 8. With assistance, withdraw the bumper rearwards from the vehicle.