Ford F2TZ-9N184-A Element

You can Select Your Vehicle to check if F2TZ-9N184-A fits your vehicle.

Relieve the fuel system pressure and loosen the fuel filler cap. Disconnect the cable from the negative terminal of the battery. If necessary, raise the vehicle and support it securely on jack stands with the front end slightly higher than the rear. Locate the fuel filter on the inside of the left-side frame rail. Remove the filter-to-fuel line retainer clips if equipped. Remove the fuel lines from the filter. Remove the nuts retaining the filter bracket to the frame rail and remove the filter. Installation is the reverse of removal. Turn the key on and off several times to pressurize the system. Check the filter for leaks. Don't forget to reset the inertia switch.

To remove this type of filter, unscrew the canister from the bottom of the fuel pump. Slowly lower the canister and filter assembly off the bottom of the fuel pump. Empty the fuel into an approved gasoline container, then remove the filter and gasket assembly. Insert a new filter and gasket assembly. Screw the filter and filter housing assembly back onto the base of the fuel pump. Start the vehicle and check the filter and surrounding area for leaks.