Make sure this part fits

Ford F2TZ-13008-B Headlamp Assembly

1992-1997 Ford F2TZ13008B

Customer Questions & Expert Answers (8)
Ford F2TZ-13008-B Headlamp Assembly
  • Part Description
    Headlamp Assy
  • Base No.
    13008
  • Position
    Driver Side
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.13008
    Manufacturer Part NumberF2TZ-13008-B, F2TZ13008B
    Part DescriptionHeadlamp Assy
    Item Dimensions9.2 x 8.0 x 12.6 inches
    Item Weight4.10 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUF2TZ-13008-B
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1992-1996 Ford Bronco6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L3AT C6, 4AT A4LD, 4AT AOD, 4AT E4OD, 4MT, 5MT
    1992-1997 Ford F Super Duty10 Cyl 6.8L, 8 Cyl 7.3L Diesel Turbocharged4AT 4R100, 5AT, 5MT, 6MT
    1992-1996 Ford F-1506 Cyl 3.8L, 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L3AT C6, 4AT 4R70W, 4AT 4R75W, 4AT AOD, 4AT E4OD, 4MT, 5MT
    1992-1997 Ford F-2506 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L3AT C6, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT
    1992-1997 Ford F-3506 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if F2TZ-13008-B fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How should the low beam adjustment be made for the 1981 Ford F-250? Posted by Customer
    A:
    Position the high intensity zone so it is two inches below the horizontal line and two inches to the side of the headlight vertical line, away from oncoming traffic. Adjustment is made by turning the appropriate adjusting screw to raise or lower the beam or to move the beam left or right.
    Posted by FordPartsGiant Specialist
    Q:
    How do you secure the bulb retaining ring for the 1981 Ford F-250? Posted by Customer
    A:
    Slip the bulb retaining ring over the rear of the plastic base against the mounting flange. Lock the ring into the socket by rotating the ring clockwise. A stop will be felt when the retaining ring is fully engaged.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Headlight
    Q:
    What is emphasized about the following headlight adjustment procedure for the 1986 Ford Bronco? Posted by Customer
    A:
    It is emphasized that the following procedure is only an interim step which will provide temporary adjustment until the headlights can be adjusted by a properly equipped shop.
    Posted by FordPartsGiant Specialist
    Q:
    How do you remove the headlight bulb for the 1996 Ford Bronco? Posted by Customer
    A:
    Remove the headlight bulb from the rear of the headlight housing as described in Steps 7 through 9.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Headlight
    Q:
    Do these headlights come with HID bulbs? Posted by Customer
    A:
    No, these are normal halogen bulbs as the HID bulbs are not compatible with this headlight
    Posted by FordPartsGiant Specialist 8/9/2020
    Q:
    Is this part number glass or plastic? Posted by Customer
    A:
    The headlight has a composite plastic lens
    Posted by FordPartsGiant Specialist 8/9/2020
    Q:
    What side is this headlight for? Posted by Customer
    A:
    This headlight can be used for both sides
    Posted by FordPartsGiant Specialist 5/9/2020
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part F2TZ-13008-B, the Right Choice

To ensure reliability, purchase Ford part # F2TZ-13008-B Headlamp Assembly. It is sometimes referred to as Ford Headlight. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Bronco, F Super Duty, F-150 models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford F2TZ13008B Headlamp Assembly. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly