Ford XL7Z-6038-BA Engine Support Insulator Assembly

You can Select Your Vehicle to check if XL7Z-6038-BA fits your vehicle.

Insert a large screwdriver or pry bar into the space between the transmission and the crossmember and try to pry the transmission up slightly. You can also insert a pry bar or large screwdriver and try to lever the transmission up and down. If the transmission is easily moved, look closely at the rubber insulator part of the mount; it's probably torn or cracked and must be replaced. The transmission should not move away from the insulator much. If there is any separation of the rubber, the mount is worn out.

Lower the engine into place, install the through bolts, and tighten them to specifications. Complete the installation by reinstalling all parts removed to gain access to the mounts.

During the check, the engine must be raised slightly to remove the weight from the mounts.