Ford FT4Z-3600-AA Steering Wheel Kit

You can Select Your Vehicle to check if FT4Z-3600-AA fits your vehicle.

To remove the airbag module, switch off the ignition and disconnect the battery. Also, center the steering wheel and release airbag module clips. You can disconnect electrical connectors and place the module in a safe location. Remove the steering wheel by removing the mounting nut and disconnecting the electrical connector. Tape the clock spring to prevent rotation. If necessary, remove the airbag clock spring by removing the steering column covers and screws. While installing, ensure the engagement of pins into holes on the rotation sensor. Tighten the screws well. Install steering column covers aligning match marks on the steering wheel with those on column covers.

The remainder of installation is the reverse of removal. Caution: Make sure the connectors fit correctly on the airbag module (with the safety tabs still UP). When connecting the two airbag connectors, follow the color-coding. The orange connector goes to the orange connection on the airbag. Do not push the connectors on if the clips are down. After the clips are secured, push the airbag module down toward the wheel until the retaining clips lock.