Ford 5S4Z-5G232-KA Exhaust Manifold Assembly

You can Select Your Vehicle to check if 5S4Z-5G232-KA fits your vehicle.

The structure of a catalytic converter is made of a honeycomb structure made of ceramic material coated with precious metals like palladium, platinum, and rhodium.

Park the vehicle on firm, level ground, apply the handbrake, then jack up the front of the vehicle and support it on axle stands.

Exhaust components are subjected to heating and cooling cycles, which can cause fasteners to become frozen and difficult to remove.

To install the intake manifold on models through 2004, follow these steps:1. Clean the mating faces of the intake manifold and cylinder head.2. Use new gaskets during installation.3. Tighten the nuts/bolts to the specified torque.4. Once the engine is fully warmed-up, check for signs of fuel, intake, or vacuum leaks.5. Test the vehicle and check for proper operation of all disturbed components.