×
Contact Us Live Chat or 1-888-788-9341
My Garage
My Account
Cart
Search Bar
Search by Part Number, Part Name, or Vehicle
Track Order Help Center
Make sure this part fits

Ford F5AZ-6108-A Piston And Pin Assembly

1991-1997 Ford F5AZ6108A

Customer Questions & Expert Answers (13)
Ford F5AZ-6108-A Piston And Pin Assembly
Ford F5AZ-6108-A Piston And Pin Assembly
  • Part Description
    PISTON AND PIN ASY
  • Base No.
    6108
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Related Parts

    Shop for related parts for your vehicle

  • Product Specifications

    BrandGenuine Ford
    Base No.6108
    Manufacturer Part NumberF5AZ-6108-A, F5AZ6108A
    Part DescriptionPISTON AND PIN ASY
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity8
    ManufacturerFord
    SKUF5AZ-6108-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1992-1997 Ford Crown Victoria8 Cyl 4.6L4AT 4R70W, 4AT AOD, 4AT AOD-E
    1997 Ford Expedition8 Cyl 4.6L4AT 4R70W, 4AT E4OD
    1997 Ford F-1508 Cyl 4.6L4AT 4R70W, 4AT E4OD, 5MT
    1997 Ford F-2508 Cyl 4.6L4AT 4R70W, 4AT E4OD, 5MT
    1996-1997 Ford Mustang8 Cyl 4.6L4AT 4R70W, 5MT
    1994-1997 Ford Thunderbird8 Cyl 4.6L4AT 4R70W, 5MT
    1991-1997 Lincoln Town Car8 Cyl 4.6L4AT, 4AT 4R70W, 4AT AOD, 4AT AODE
    1994-1997 Mercury Cougar8 Cyl 4.6L4AT, 4AT 4R70W, 4AT AODE
    1992-1997 Mercury Grand Marquis8 Cyl 4.6L4AT, 4AT 4R70W, 4AT AOD, 4AT AODE

  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if F5AZ-6108-A fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    Where should the upper and lower bearing inserts be placed for the 1989 Lincoln Town Car? Posted by Customer
    A:
    The upper bearing insert should be placed in the connecting rod - The lower bearing insert should be placed in the cap - Ensure proper tab alignment without lubrication.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be measured for the piston rings for the 1992 Lincoln Town Car? Posted by Customer
    A:
    Measure piston ring side clearance and piston-to-bore clearance, replacing pistons if needed.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What might excessive clearance require for the 1983 Lincoln Town Car? Posted by Customer
    A:
    Excessive clearance may require new connecting rods or crankshaft repair.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    How do you check the endplay of the connecting rods for the 1999 Mercury Grand Marquis? Posted by Customer
    A:
    Before the connecting rods are removed, check the endplay with a dial indicator or with feeler gauges. Slide them between the first connecting rod and the crankshaft throw until the play is removed. The endplay is equal to the thickness of the feeler gauge(s).
    Posted by FordPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be done with the crankshaft before inserting the piston/connecting rod assembly for the 2007 Mercury Grand Marquis? Posted by Customer
    A:
    Rotate the crankshaft until the number one connecting rod journal is at BDC (bottom dead center) and apply a coat of engine oil to the cylinder walls.
    Posted by FordPartsGiant Specialist
    Q:
    How is the piston ring side clearance measured for the 2003 Mercury Grand Marquis? Posted by Customer
    A:
    Measure the piston ring side clearance by laying a new piston ring in each ring groove and slipping a feeler gauge in beside it. Check the clearance at several points around the groove. Use the correct ring for each groove as they are different. If the side clearance is greater than specified, new pistons will have to be used.
    Posted by FordPartsGiant Specialist
    Q:
    How should the connecting rod/piston assembly be removed from the engine for the 1994 Ford Crown Victoria? Posted by Customer
    A:
    Remove the bearing insert and push the connecting rod/piston assembly out through the top of the engine. Use a wooden or plastic hammer handle to push on the upper bearing surface in the connecting rod. If resistance is felt, double-check to make sure that all of the ridge was removed from the cylinder.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    How is the oil clearance checked using Plastigage for the 1998 Ford Crown Victoria? Posted by Customer
    A:
    Cut a piece of the appropriate size Plastigage slightly shorter than the width of the connecting rod bearing and lay it in place on the number one connecting rod journal, parallel with the journal axis.
    Posted by FordPartsGiant Specialist
    Q:
    How is the piston ring side clearance measured for the 2008 Ford Crown Victoria? Posted by Customer
    A:
    Measure the piston ring side clearance by laying a new piston ring in each ring groove and slipping a feeler gauge in beside it. Check the clearance at several points around the groove. Use the correct ring for each groove as they are different. If the side clearance is greater than specified, new pistons will have to be used.
    Posted by FordPartsGiant Specialist
    Q:
    How do I remove the connecting rod cap and bearing insert for the 2000 Ford Expedition? Posted by Customer
    A:
    Remove the connecting rod cap and bearing insert together, being careful not to drop the bearing insert out of the cap.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What is the caution regarding connecting rod bolts for the 2000 Ford Expedition? Posted by Customer
    A:
    The connecting rod bolts on all engines covered by this manual are "torque-to-yield" bolts and are NOT reusable. Once removed, they must be replaced with new bolts.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done if the pistons need to be removed from the connecting rods for the 2005 Ford Expedition? Posted by Customer
    A:
    If the pistons must be removed from the connecting rods, they should be taken to an automotive machine shop to check for bend and twist, as they have special equipment for this purpose. It is advised not to disassemble the pistons and connecting rods unless new parts are needed.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part F5AZ-6108-A, the Right Choice

To ensure reliability, purchase Ford part # F5AZ-6108-A Piston And Pin Assembly. It is sometimes referred to as Ford Piston. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Crown Victoria, F-150, Mustang models. It fits Lincoln Town Car. It also fits Mercury Cougar, Grand Marquis.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford F5AZ6108A Piston And Pin Assembly. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly