How to remove the piston and connecting rod assemblies on Ford Crown Victoria?

Before the piston and connecting rod assemblies can be removed, the cylinder heads, oil pan and oil pump have to be taken off on 5.0L engines depending on the type of engine that will be overhauled. First, look for any sharp edges at the extremes of ring travel, the ring travel and those should be gotten rid of by use of a reamer before you attempt to remove the piston and connecting rod assemblies since tearing of the pistons may occur. After that level off the ridges turn the engine upside down in such a way that the crankshaft is on the top. Measure the endplay of the connecting rods with the help of dial indicator or feeler gauges; if the endplay of the rods is more than the service limit specified, then it may be necessary to fit new connecting rods. Label the connecting rods and caps to distinguish them from one another; alternatively, back off the cap nuts the last half turn before they are ready to come off. Withdraw the connecting rod cap together with the bearing insert-be careful not to let the bearing insert fall. When the connecting rod has studs with nuts, it is advisable to cover the crankshaft journal and cylinder wall with plastic or rubber hose in order to remove the piston. Force the complete connecting rod and piston assembly out through the top of the engine by means of a wooden or plastic hammer handle respectively , and make sure that all ridges are got rid of. Proceed in the same manner for each of the other cylinders which are also present in the apparatus. Upon removal, align and replace the connecting rod caps and bearing inserts back into the rightful rods fastening the cap nuts loosely so as not to harm the bearing of the rod . As it will cause difficulty in reassembly of the pistons with the connecting rods retain the two as a single unit.

Genuine Ford Crown Victoria Piston

Engine Pistons

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Pistons found

View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: F8AZ-6108-BA
$32.79 MSRP: $44.81
You Save: $12.02 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston And Pin Assy; Piston
- Replaced by: 8L2Z-6108-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Piston
Part Number: F3AZ-6108-CB
$21.81 MSRP: $29.81
You Save: $8.00 (27%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Manufacturer Note: .50mm/.020" oversize
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: 1L2Z-6108-BA
$32.79 MSRP: $44.81
You Save: $12.02 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston And Pin Assy
- Replaced by: 8L2Z-6108-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: F5AZ-6108-BA
$32.79 MSRP: $44.81
You Save: $12.02 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston And Pin Assy
- Replaced by: 8L2Z-6108-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD-E
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: 8L2Z-6108-E
$40.13 MSRP: $58.67
You Save: $18.54 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston And Pin Assy; Piston
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: 2L2Z-6108-HA
$21.97 MSRP: $30.52
You Save: $8.55 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston And Pin Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: 2L2Z-6108-AA
$37.87 MSRP: $52.61
You Save: $14.74 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston And Pin Assy; Piston
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Piston And Connecting Rod Assy
Part Number: 2L2Z-6100-AA
$0.00
Product Specifications
- Replaced by: 7L2Z-6100-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2003 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: 1L2Z-6108-AA
Product Specifications
- Other Name: Piston And Pin Assy; Piston
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: 2L2Z-6108-FA
Product Specifications
- Other Name: Piston And Pin Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R70W, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: 2L2Z-6108-GA
Product Specifications
- Other Name: Piston And Pin Assy
- Replaced by: 8L2Z-6108-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: 2L2Z-6108-JA
Product Specifications
- Other Name: Piston And Pin Assy; Piston
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: 2L2Z-6108-MA
Product Specifications
- Other Name: Piston And Pin Assy; Piston
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R70W, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: 2L2Z-6108-NA
Product Specifications
- Other Name: Piston And Pin Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2008 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R70W, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Piston
Part Number: 8L2Z-6108-F
Product Specifications
- Replaces: 2L2Z-6108-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R70W, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: F5AZ-6108-A
Product Specifications
- Other Name: PISTON AND PIN ASY
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: F8AZ-6108-AA
Product Specifications
- Other Name: Piston And Pin Assy; Piston
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: XR3Z-6108-GA
Product Specifications
- Other Name: Piston And Pin Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: XR3Z-6108-HA
Product Specifications
- Other Name: Piston And Pin Assy
- Replaced by: 2C5Z-6108-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Piston And Pin Assembly
Part Number: XR3Z-6108-JA
Product Specifications
- Other Name: Piston And Pin Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W

Ford Crown Victoria Piston

We provide a wide range of Ford Crown Victoria Piston at the best prices possible. If you need Ford Crown Victoria Piston, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Crown Victoria Piston Parts Questions & Experts Answers

Piston
F3AZ-6108-CB
Q: How to remove the piston and connecting rod assemblies on Ford Crown Victoria?
A: Before the piston and connecting rod assemblies can be removed, the cylinder heads, oil pan and oil pump have to be taken off on 5.0L engines depending on the type of engine that will be overhauled. First, look for any sharp edges at the extremes of ring travel, the ring travel and those should be gotten rid of by use of a reamer before you attempt to remove the piston and connecting rod assemblies since tearing of the pistons may occur. After that level off the ridges turn the engine upside down in such a way that the Crankshaft is on the top. Measure the endplay of the connecting rods with the help of dial indicator or feeler gauges; if the endplay of the rods is more than the service limit specified, then it may be necessary to fit new connecting rods. Label the connecting rods and caps to distinguish them from one another; alternatively, back off the cap nuts the last half turn before they are ready to come off. Withdraw the connecting rod cap together with the bearing insert-be careful not to let the bearing insert fall. When the connecting rod has studs with nuts, it is advisable to cover the crankshaft journal and cylinder wall with plastic or rubber hose in order to remove the piston. Force the complete connecting rod and piston assembly out through the top of the engine by means of a wooden or plastic hammer handle respectively , and make sure that all ridges are got rid of. Proceed in the same manner for each of the other cylinders which are also present in the apparatus. Upon removal, align and replace the connecting rod caps and bearing inserts back into the rightful rods fastening the cap nuts loosely so as not to harm the bearing of the rod . As it will cause difficulty in reassembly of the pistons with the connecting rods retain the two as a single unit.