How to remove and install a power steering pump on Ford Crown Victoria?

On 5.0L engines, relieve tension on the accessory drivebelt used to drive the power steering pump pulley; on 4.6L engines, relieve tension on the serpentine belt. On 5.0L engines, the pump can be accessed from above. On 4.6L engines, raise the front of the vehicle and place it securely on jackstands as the pump is more easily accessed from underneath the vehicle on these models. Locate the pump on the left (driver's) side of the engine block. Disconnect the fluid return hose from the pump and drain the fluid from the pump reservoir. Disconnect the pressure hose from the pump but do not unscrew the pressure fitting itself. Plug the lines to prevent contamination. Models from 1997 on have an electrical connector for the variable assist steering. Disconnect this electrical connector before removing the pump. On 5.0L engines, the pump is mounted on a bracket bolted to the engine. You'll have to remove the pulley before you can remove the pump-to-bracket mounting bolts. A special puller for this purpose is available at most auto parts stores. On 4.6L engines, the pump is mounted directly on the block, so the pulley doesn't cover up the mounting bolts. On these models, it's easier to remove the pulley on the bench after you've removed the pump assembly. Remove the pump mounting bolts and remove the pump. Installation is the reverse of the above procedure. On 5.0L engines, you'll need a special pulley installer tool to install the pulley once the pump is bolted to its mounting bracket. Install the accessory drivebelt or the serpentine belt. Install the pressure and return lines and fill the reservoir with an approved fluid. Start the engine and turn the steering wheel from lock to lock several times to distribute the fluid, then recheck the fluid level and top-off if necessary. Bleed the power steering system.

Genuine Ford Crown Victoria Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Power Steering Pumps found

View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: XW7Z-3A674-ABRM
$103.12 MSRP: $194.55
You Save: $91.43 (47%)
ADD TO CART
Product Specifications
- Replaced by: XW7Z-3A674-ADRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 7W1Z-3A674-B
$92.24 MSRP: $225.45
You Save: $133.21 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 7W1Z-3A674-BRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 9W7Z-3A674-BARM
$166.47 MSRP: $272.73
You Save: $106.26 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Steering Pump
- Replaces: 8W7Z-3A674-C, 9W7Z-3A674-B, 9W7Z-3A674-A, STP-261, STP-255, STP-229
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 9W7Z-3A674-B
$166.47 MSRP: $272.73
You Save: $106.26 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 9W7Z-3A674-BARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 8W7Z-3A674-C
$166.47 MSRP: $272.73
You Save: $106.26 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 9W7Z-3A674-BARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 3W1Z-3A674-CARM
$106.08 MSRP: $172.73
You Save: $66.65 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Steering Pump
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: F8AZ-3A674-CBRM
$119.17 MSRP: $194.55
You Save: $75.38 (39%)
ADD TO CART
Product Specifications
- Replaced by: XW7Z-3A674-ADRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2000 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 7W1Z-3A674-BRM
$92.24 MSRP: $225.45
You Save: $133.21 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Steering Pump
- Replaces: STP-204, 7W1Z-3A674-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 8W7Z-3A674-B
$123.45 MSRP: $194.55
You Save: $71.10 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 8W7Z-3A674-BRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 8W7Z-3A674-A
$100.12 MSRP: $139.08
You Save: $38.96 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Steering Pump
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 4W1Z-3A674-BA
$123.45 MSRP: $194.55
You Save: $71.10 (37%)
ADD TO CART
Product Specifications
- Replaced by: 8W7Z-3A674-BRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 7W1Z-3A674-A
$123.45 MSRP: $194.55
You Save: $71.10 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 8W7Z-3A674-BRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 8W7Z-3A674-AARM
$133.71 MSRP: $210.91
You Save: $77.20 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: F85Z-3A674-ABRM
$127.38 MSRP: $201.82
You Save: $74.44 (37%)
Product Specifications
- Other Name: Power Steering Pump
- Manufacturer Note: Tag ID: HBD-DF, HBD-GG, Blue, Police, taxi, fleet
- Replaces: F85Z-3A674-AARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 8W7Z-3A674-BRM
$123.45 MSRP: $194.55
You Save: $71.10 (37%)
Product Specifications
- Other Name: Power Steering Pump
- Replaces: 4W1Z-3A674-BA, 4W1Z-3A674-AA, 8W7Z-3A674-B, 7W1Z-3A674-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
- 2004 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Pump Assy - Power Steering
Part Number: 5W1Z-3A674-AA
Product Specifications
- Manufacturer Note: Tag ID: HBD-MA/MB, Blue/Brown
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R75W

Ford Crown Victoria Power Steering Pump

The Power Steering Pump is one of the complex system of Ford Crown Victoria cars that translates the engine energy to hydraulic power in order to help the driver to steer the wheel. The power steering pump assist the steering system by supplying hydraulic power to the system makes it easier to maneuver the vehicle especially when at slow speed or even when the car is stationary. The mentioned Ford Crown Victoria cars have hydraulic power-steering system in which a hydraulic cylinder works as a part of the servo system increasing the steering force, though preserving its direct connection to the wheels through the steering-wheel. This insists that even when the powering system fails, the pilot can steer the car manually. All in all, the Power Steering Pump of Ford Crown Victoria automobiles is a very significant component in the easy and better control of the vehicle by the driver.

We provide a wide range of Ford Crown Victoria Power Steering Pump at the best prices possible. If you need Ford Crown Victoria Power Steering Pump, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Crown Victoria Power Steering Pump Parts Questions & Experts Answers

Pump Assy - Power Steering
7W1Z-3A674-B
Q: How to remove and install a power steering pump on Ford Crown Victoria?
A: On 5.0L engines, relieve tension on the accessory drivebelt used to drive the power steering pump pulley; on 4.6L engines, relieve tension on the serpentine belt. On 5.0L engines, the pump can be accessed from above. On 4.6L engines, raise the front of the vehicle and place it securely on jackstands as the pump is more easily accessed from underneath the vehicle on these models. Locate the pump on the left (driver's) side of the engine block. Disconnect the fluid return hose from the pump and drain the fluid from the pump reservoir. Disconnect the pressure hose from the pump but do not unscrew the pressure fitting itself. Plug the lines to prevent contamination. Models from 1997 on have an electrical connector for the variable assist steering. Disconnect this electrical connector before removing the pump. On 5.0L engines, the pump is mounted on a bracket bolted to the engine. You'll have to remove the pulley before you can remove the pump-to-bracket mounting bolts. A special puller for this purpose is available at most auto parts stores. On 4.6L engines, the pump is mounted directly on the block, so the pulley doesn't cover up the mounting bolts. On these models, it's easier to remove the pulley on the bench after you've removed the pump assembly. Remove the pump mounting bolts and remove the pump. Installation is the reverse of the above procedure. On 5.0L engines, you'll need a special pulley installer tool to install the pulley once the pump is bolted to its mounting bracket. Install the accessory drivebelt or the serpentine belt. Install the pressure and return lines and fill the reservoir with an approved fluid. Start the engine and turn the steering wheel from lock to lock several times to distribute the fluid, then recheck the fluid level and top-off if necessary. Bleed the power steering system.