Ford K2GZ-18124-J Shock Absorber Assembly

You can Select Your Vehicle to check if K2GZ-18124-J fits your vehicle.

Inspect the shock absorbers for fluid leakage, ensure they are securely mounted and undamaged, and pay attention to upper mounts for wear or damage. Replace them if needed.

1. Loosen the wheel lug nuts. 2. Raise the vehicle and support it securely on jack stands. 3. Remove the wheel. 4. Unbolt the brake hose bracket from the shock absorber. 5. Remove the wheel speed sensor and detach the wiring harness by removing the clamp bracket bolt. 6. On 2015 and later models, remove the stabilizer bar link nut and disconnect the link from the strut. 7. Support the control arm with a floor jack. 8. Unscrew the nuts securing the strut to the steering knuckle. 9. Tap the bolts out with a hammer. 10. Use the floor jack to lower the knuckle to allow room to remove the shock absorber/coil spring assembly, being careful not to overextend the inner CV joint.

Maneuver the shock out of the vehicle.

Signs of wear include leaking fluid, loss of damping capability, or issues like sagging or cracked coil springs.