Ford 9T4Z-18124-CA Shock Absorber Assy - Front

You can Select Your Vehicle to check if 9T4Z-18124-CA fits your vehicle.

Remove the upper shock absorber mounting nuts.

Push down on each corner of the vehicle and observe its body movement, expecting it to return to a level position within one or two bounces. Persistent bouncing or failure to level may indicate worn or weak shock absorbers.

1. Guide the assembly up into the fenderwell. 2. Align the previously made match marks. 3. Insert the upper mounting studs through the holes in the body. 4. Once the studs protrude, install the new nuts to prevent the shock from falling back through, but don't tighten them yet. 5. Use the jack to position the steering knuckle. 6. Install the two lower mounting bolts and nuts. 7. Tighten the nuts to the specified torque. 8. Install the wheel and lug nuts. 9. Lower the vehicle and tighten the lug nuts to the specified torque. 10. Finally, tighten the upper mounting nuts to the specified torque.

Utilize coil spring compressor tools to fully engage and compress the spring until tension is relieved from the upper mount.