Ford F2GZ-18124-AC Shock Absorber Assembly - Front

You can Select Your Vehicle to check if F2GZ-18124-AC fits your vehicle.

Test the shock's operation by moving the piston through various strokes, ensuring smooth and continuous resistance. Any signs of wear, damage, or uneven resistance necessitate replacement.

Inspect the shock absorbers for fluid leakage, ensure they are securely mounted and undamaged, and pay attention to upper mounts for wear or damage. Replace them if needed.

1. Guide the assembly up into the fenderwell. 2. Align the previously made match marks. 3. Insert the upper mounting studs through the holes in the body. 4. Once the studs protrude, install the new nuts to prevent the shock from falling back through, but don't tighten them yet. 5. Use the jack to position the steering knuckle. 6. Install the two lower mounting bolts and nuts. 7. Tighten the nuts to the specified torque. 8. Install the wheel and lug nuts. 9. Lower the vehicle and tighten the lug nuts to the specified torque. 10. Finally, tighten the upper mounting nuts to the specified torque.

From inside the rear cargo area, remove the interior quarter trim panel.