Ford 4S4Z-18124-BB Shock Absorber Assembly

You can Select Your Vehicle to check if 4S4Z-18124-BB fits your vehicle.

If the front suspension struts exhibit signs of wear (such as leaking fluid, loss of damping capability, sagging, or cracked coil springs), they should be disassembled and overhauled as necessary. The struts themselves cannot be serviced and should be replaced if faulty; however, the springs and related components can be replaced individually. To maintain balanced characteristics on both sides of the vehicle, the components on both sides should be replaced at the same time.

Support the steering knuckle/hub assembly when released from the strut to prevent any damage to the driveshaft.

1. Open the trunk or liftgate and remove the interior trim panel to access the shock absorber top mounting nut. 2. Use an Allen key to hold the piston rod and remove the shock absorber upper mounting nut. 3. Chock the front wheels, jack up the rear of the vehicle, and support it on axle stands. Remove the wheels as required. 4. Place a jack under the lower suspension arm/coil spring for support. Unscrew and remove the shock absorber lower mounting bolt, then withdraw the shock absorber from under the vehicle.

Inspect for fluid leakage.