Ford 9S4Z-18124-E Shock Absorber Assembly

You can Select Your Vehicle to check if 9S4Z-18124-E fits your vehicle.

During reassembly, note the following points: a) Ensure that the coil spring ends are correctly located in the upper and lower seats before releasing the compressor. b) Check that the bearing is correctly installed on the piston rod seat. c) Tighten the thrust bearing retaining nut to the specified torque. d) The coil springs must be installed with the paint mark at the bottom.

The first step is to disconnect the brake hose from the bracket on the strut by unclipping the brake hose from the strut.

The manufacturer advises that all suspension and steering system fasteners that require a specific torque should be replaced with new ones whenever they have been removed. This does not apply to the subframe bolts.

Check for play or unusual noise when rotating the tires.