Make sure this part fits

Ford CT4Z-18125-A Shock Absorber Assembly

2011-2015 Ford CT4Z18125A

Customer Questions & Expert Answers (9)
Ford CT4Z-18125-A Shock Absorber Assembly
  • Part Description
    Shock Absorber Assy
  • Base No.
    18125
  • Replaces
    ASH-12225, BT4Z-18125-A
  • Manufacturer
    Ford
Make sure this part fits
$60.39 MSRP: $99.82
You Save: $39.43 (40%)
Ships in 1 Business Day
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.18125
    Manufacturer Part NumberCT4Z-18125-A, CT4Z18125A
    Part DescriptionShock Absorber Assy
    Other NamesShock, Shock Absorber
    Item Dimensions21.4 x 3.5 x 3.4 inches
    Item Weight5.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesASH-12225, BT4Z-18125-A
    Require Quantity2
    ManufacturerFord
    SKUCT4Z-18125-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2014 Ford Edge4 Cyl 2.0L EcoBoost (240PS), 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    2011-2015 Lincoln MKX4 Cyl 2.0L EcoBoost (240PS), 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
  • Customer Questions & Expert Answers

    Q:
    Does the PN fit my vehicle? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if CT4Z-18125-A fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How should the shock absorber/coil spring assembly be reinstalled for the 2012 Lincoln MKX? Posted by Customer
    A:
    1. Guide the assembly up into the fenderwell. 2. Align the previously made match marks. 3. Insert the upper mounting studs through the holes in the body. 4. Once the studs protrude, install the new nuts to prevent the shock from falling back through, but don't tighten them yet.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What steps should be followed for the 2008 Lincoln MKX if the shock absorber is going to be replaced? Posted by Customer
    A:
    If the shock absorber is going to be replaced on 2015 and later models, remove the piston rod nut and separate the upper mounting bracket.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    Why is it advisable to replace components on both sides simultaneously for the 2017 Lincoln MKX? Posted by Customer
    A:
    To maintain balanced characteristics on both sides of the vehicle, it's advisable to replace components on both sides simultaneously.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should you do if substantial fluid leakage is observed in the shock absorbers for the 2013 Lincoln MKX? Posted by Customer
    A:
    Replace the shock absorbers.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can you check the steering components for the 2013 Ford Edge? Posted by Customer
    A:
    While an assistant turns the steering wheel, check for free movement, chafing, and binding in the steering components.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done to remove the cowl panel on the 2019 Ford Edge? Posted by Customer
    A:
    In the engine compartment, mark the relationship of one of the mounting studs to the body, then remove the four upper mounting nuts.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What steps should be followed for the 2011 Ford Edge if the shock absorber was replaced? Posted by Customer
    A:
    If the shock absorber was replaced on 2015 and later models, install the upper mounting bracket to the shock absorber and tighten the piston rod nut to the torque.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What components should be removed during disassembly for the 2012 Ford Edge? Posted by Customer
    A:
    Subsequently, remove the upper mount, spring, boot, bump stop, and lower spring seat.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part CT4Z-18125-A, the Right Choice

To ensure reliability, purchase Ford part # CT4Z-18125-A Shock Absorber Assembly. It is sometimes referred to as Ford Shock Absorber. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Edge models. It fits Lincoln MKX.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford CT4Z18125A Shock Absorber Assembly. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly