Ford F2GZ-18124-L Shock Absorber Assembly

You can Select Your Vehicle to check if F2GZ-18124-L fits your vehicle.

If the shock absorber was replaced on 2015 and later models, install the upper mounting bracket to the shock absorber and tighten the piston rod nut to the torque.

1. Guide the assembly up into the fenderwell. 2. Align the previously made match marks. 3. Insert the upper mounting studs through the holes in the body. 4. Once the studs protrude, install the new nuts to prevent the shock from falling back through, but don't tighten them yet. 5. Use the jack to position the steering knuckle. 6. Install the two lower mounting bolts and nuts. 7. Tighten the nuts to the specified torque. 8. Install the wheel and lug nuts. 9. Lower the vehicle and tighten the lug nuts to the specified torque. 10. Finally, tighten the upper mounting nuts to the specified torque.

To maintain balanced characteristics on both sides of the vehicle, it's advisable to replace components on both sides simultaneously.

Assess tire wear patterns, inflation, and inspect the universal joint, steering gear housing, dust boots, boot clamps, tie-rod ends, and all suspension and steering components for damage, wear, loose bolts, and deteriorated rubber bushings.