Ford HG9Z-18125-J Shock Absorber Assembly

You can Select Your Vehicle to check if HG9Z-18125-J fits your vehicle.

Check the shock body for leaking fluid, dents, cracks, and other obvious damage which would warrant replacement.

Loosen the lug nuts, raise the vehicle, and support it securely on jack stands. Block the front wheels to prevent the vehicle from rolling. Remove the wheel.

If any cracks or signs of leaking lubricant are detected, prompt replacement is necessary to maintain the integrity of the CV joints.

Examine the shock for signs of fluid leakage. Check the piston rod for signs of pitting along its entire length, and check the shock body for signs of damage. Test the operation of the shock, while holding it in an upright position, by moving the piston through a full stroke, then through short strokes of 2 to 4 inches. In both cases, the resistance felt should be smooth and continuous. If the resistance is jerky or uneven, or if there is any visible sign of wear or damage, replacement is necessary.