Ford E35Y-17255-A Speedometer Assembly

You can Select Your Vehicle to check if E35Y-17255-A fits your vehicle.

Disconnect the cable from the negative battery terminal. Remove the instrument cluster bezel. Detach the shift indicator assembly from the cluster by removing the screw and disconnecting the wire loop from the pin on the column shift indicator. Remove the instrument cluster retaining screws. Reach behind the cluster housing and press on the release lever to disconnect the speedometer cable. You can also reach behind the cluster and press the tab to release the speedometer cable or disconnect the electronic speed sensor. Pull the cluster out and disconnect the electrical connectors. Remove the cluster from the instrument panel. On early models, rotate the bezel out of the opening. On later models, tilt the top of the bezel toward you, then pull it straight out. Installation is the reverse of removal.

Before accessing the instrument panel, you should remove the knee bolster, knee bolster reinforcement panel, the glove compartment, and the panel below the glove compartment.