Ford 9L1Z-5310-K Spring - Front

You can Select Your Vehicle to check if 9L1Z-5310-K fits your vehicle.

Working from underneath the vehicle, remove the two nuts (2WD models) or bolt and nut (4WD models) that attach the lower end of the shock absorber to the lower control arm, and then pull the shock out from below.

The coil spring and lower control arm should be installed.

Some steps and precautions include turning off the air suspension system, raising the vehicle securely on jackstands, and removing the wheels as needed for access.

Additional steps include loosening the front wheel lug nuts, raising the vehicle, removing the wheels, detaching various components like the tie-rod end, upper ball joint, and fasteners attaching the lower end of the shock absorber to the lower control arm. Finally, remove the shock absorber/coil spring assembly for inspection and replacement as needed. Installation follows the reverse of the removal process, ensuring proper tightening of fasteners and lug nuts.

There are two drain holes in the spring seal in the lower control arm.

The instructions cover actions such as loosening wheel lugnuts, raising and supporting the vehicle, removing and installing various nuts, bolts, and components. It also mentions using new fasteners where necessary.