Make sure this part fits

Ford F4AZ-5310-B Spring - Front

1994-2002 Ford F4AZ5310B

Customer Questions & Expert Answers (5)
Ford F4AZ-5310-B Spring - Front
  • Part Description
    Spring - Front
  • Position
    Front
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Manufacturer Part NumberF4AZ-5310-B, F4AZ5310B
    Part DescriptionSpring - Front
    Manufacturer NoteSpring Code - 3, Yellow tape, ID tag: BOS
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerFord
    SKUF4AZ-5310-B
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1994-2002 Ford Crown Victoria8 Cyl 4.6L4AT 4R70W, 4AT AOD-E
    1995-2002 Mercury Grand Marquis8 Cyl 4.6L4AT, 4AT 4R70W, 4AT AODE
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if F4AZ-5310-B fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What steps are involved in the removal of the coil spring for the 1989 Mercury Grand Marquis? Posted by Customer
    A:
    Loosen the wheel lug nuts. Raise the vehicle and securely support it on jackstands. Remove the wheels. On 1988 through 1991 models, disconnect the stabilizer bar from the link. Remove the shock absorber. Disconnect the center link from the Pitman arm. Use a suitable spring compressor, following the manufacturer's instructions, to relieve tension on the spring. Compress the spring. Remove the nuts and bolts securing the inner end of the lower control arm to the frame. Slowly lower the control arm. Remove the spring and compressor as a unit. Note the installation of the upper insulator between the upper end of the spring and the frame. If the spring is to be replaced, slowly loosen the spring compressor tool until all tension is removed, then remove the tool.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What additional steps are required for reassembly for the 2006 Mercury Grand Marquis? Posted by Customer
    A:
    Snap the right parking brake cable into the upper suspension arm retainer. Install the rear stabilizer bar. Connect the height sensor connector link to the upper control arm.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How should I prepare the 1997 Ford Crown Victoria for rear coil spring replacement? Posted by Customer
    A:
    Raise the rear of the vehicle and support it securely on jackstands placed under the frame. Remove the rear wheel and block the front wheels.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What steps are involved in the installation of the coil spring for the 2011 Ford Crown Victoria? Posted by Customer
    A:
    Place the spring upper insulator on the spring and secure it with tape. Install the spring compressor according to the manufacturer's instructions and compress the spring. Position the spring on the lower control arm, ensuring the lower end properly engages with the seat. On 1988 through 1991 models, align the end of the spring to cover the first hole in the lower control arm spring seat, leaving the second hole uncovered. Carefully raise the lower control arm, guiding the inner end to align with the bolt holes in the frame. Install the pivot bolts into the control arm and the frame. Loosely attach the nuts on the bolts. Attach the center link to the Pitman arm. Attach the lower end of the shock absorber to the lower control arm. On 1988 through 1991 models, attach the stabilizer bar to the link. Install the shock absorber. Install the wheels. Remove the jackstands, lower the floor jack, and lower the vehicle. Tighten the wheel lug nuts to the specified torque. After lowering the vehicle, tighten the lower control arm pivot bolt nuts to the specified torque. This can also be done with the vehicle on jackstands by raising the lower control arm with a floor jack to simulate normal ride height.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part F4AZ-5310-B, the Right Choice

To ensure reliability, purchase Ford part # F4AZ-5310-B Spring - Front. It is sometimes referred to as Ford Coil Springs. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Crown Victoria models. It fits Mercury Grand Marquis.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford F4AZ5310B Spring - Front. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly