Lincoln BT4Z-5A649-A Arm Assy - Rear Suspension

You can Select Your Vehicle to check if BT4Z-5A649-A fits your vehicle.

For the toe link, raise the lower control arm slightly, mark the position of the adjuster cam, remove fasteners from the inboard and outboard ends of the toe link, and replace them. Align the marks on the cam adjuster and the sub-frame before tightening the fasteners after the full weight is on the wheels or by raising the outer end of the lower suspension arm with a floor jack to simulate normal ride height.

For the upper suspension arm, disconnect the wheel speed sensor and brake hose bracket (for all-wheel drive models), lower the rear sub-frame with a floor jack to release spring pressure, and then remove the upper arm bolts. Installation involves securing new bolts but leaving them loose until the vehicle is lowered or raising the outer end of the lower suspension arm with a floor jack to simulate normal ride height.