Lincoln 1L3Z-7000-BCRM Automatic Transmission Assembly

You can Select Your Vehicle to check if 1L3Z-7000-BCRM fits your vehicle.

A faulty transmission should not be removed before the vehicle has been assessed by a knowledgeable technician equipped with the proper tools.

Prior to installation, make sure the torque converter is securely engaged in the pump. If you've removed the converter, apply a small amount of transmission fluid on the torque converter rear hub, where the transmission front seal rides. Install the torque converter onto the front input shaft of the transmission while rotating the converter back and forth. It should engage into the transmission front pump in stages. To make sure the converter is fully engaged, lay a straightedge across the transmission-to-engine mating surface and make sure the converter lugs are at least 3/4-inch below the straightedge.

Attach the shift cable to the manual lever.

Disconnect the shift cable from the manual lever and from the cable bracket.