Lincoln XL1Z-5482-FA Bar - Stabilizer

You can Select Your Vehicle to check if XL1Z-5482-FA fits your vehicle.

If the vehicle is equipped with air suspension, turn off the air suspension system. The switch is located in the area of the right kick panel. Loosen the rear wheel lug nuts, raise the rear of the vehicle and support it securely on jackstands. Block the front wheels to keep the vehicle from rolling off the stands. Remove the rear wheels. Remove the sway bar kit-to-link nuts. Remove the bolts from the upper ends of the links and remove the links. Remove the sway bar bushing bracket bolts and remove the sway bar kit assembly. Inspect the sway bar bushings and link bushings for cracks, tears, and other signs of deterioration. Replace as necessary. Installation is the reverse of removal. Be sure to tighten all fasteners. Reactivate the air suspension system, if equipped.

Remove the rear wheels.

Remove the nuts from the link bolts and remove the link bolts.

Use new nuts and consider replacing the bolts (attached to plates) with new plates/bolts on 2008 and later Expedition/Navigator models. These components are assembled with high torque levels.