Lincoln F6AZ-2853-AA Cable Assembly - Parking

You can Select Your Vehicle to check if F6AZ-2853-AA fits your vehicle.

To replace the intermediate cable, remove the adjusting nut from under the vehicle, disconnect the cable ends at the left rear and transverse cable, and remove the cable and adjuster bracket assembly, keeping track of the order of parts. Install the equalizer assembly and reconnect the cable ends.

When reattaching the intermediate cable, ensure that the left rear cable is on top and attached to the forward end of the cable connector, while the right rear cable should be under the left rear cable and attached to the rear end of the connector.

For the intermediate and rear cables on 1990 and later models, ensure the parking brake is released, raise the rear of the vehicle, support it on jackstands, disconnect the rear cable (following specific procedures based on brake type), disconnect the left rear cable from the intermediate cable, and disconnect the right rear cable from the intermediate cable.