Lincoln F1LY-2V552-ARM Brake Caliper Assembly-Less Pads

You can Select Your Vehicle to check if F1LY-2V552-ARM fits your vehicle.

To overhaul the rear calipers for 1991 and 1992 Mark VII, raise the vehicle, remove the rear wheels, and disconnect the parking brake cable. Disconnect the brake hose and remove the caliper from the anchor plate. Overhauling this type of caliper is challenging and requires special tools, so it is recommended to replace both rear calipers with new or rebuilt units if necessary. Reinstall the brake pads and caliper, adjusting the piston as needed. Install the slider pins and boots to the anchor plate, clean the threads of the pinch bolts, and apply thread-locking compound. Install the brake hose using new washers, and the remainder of installation is the reverse of removal. Bleed the brake system to complete the process.