Lincoln F5AZ-2V552-BARM Brake Caliper Assembly-Less Pads

You can Select Your Vehicle to check if F5AZ-2V552-BARM fits your vehicle.

Reconnect the brake hose, bleed the brakes if necessary, install the wheel, lower the vehicle, tighten lug nuts, pump the brake pedal to engage the pads with the disc, and test the brake operation before normal vehicle use.

To overhaul the rear calipers for 1975 through 1990 Continental and Mark series and 1981 through 1988 Town Car, start by raising the vehicle and supporting it securely on jackstands. Remove the rear wheels and disconnect the parking brake cable at the lever. Disconnect the brake hose and plug the end. Remove the calipers, and if necessary, loosen the caliper and retainer to force the piston back into its bore. Clean and inspect the caliper, anchor plate, and disc for corrosion, wear, and fluid leakage. Reinstall the brake pads and caliper, adjusting the piston as needed. Connect and adjust the parking brake cable, install the wheels, and take the vehicle for a test drive to check for proper braking action.

When proceeding with the rebuild, it's crucial to ensure that a rebuild kit is available. It's also essential to always rebuild calipers in pairs, never singly.