Lincoln F2GZ-3504-HE Gear Assembly - Steering

You can Select Your Vehicle to check if F2GZ-3504-HE fits your vehicle.

Before removing the steering gear, you need to disconnect the cable from the negative terminal of the battery.

The steps to remove the steering gear are as follows: 1. Loosen the front wheel lug nuts. 2. Raise the vehicle and place it securely on jackstands. 3. Remove both front wheels. 4. Detach the tie-rod ends from the steering knuckles. 5. Place a drain pan under the steering gear and detach the power steering pressure and return lines, capping the ends to prevent excessive fluid loss and contamination. 6. Remove the stabilizer bar. 7. Index mark the steering shaft to the steering gear input shaft, then disconnect the steering shaft from the steering gear input shaft. 8. Remove the heat shield and the pressure line retainers from the steering gear. 9. Remove the mounting bolts and detach the steering gear from the subframe.