Lincoln E1GZ-1104-A Hub Assembly - Wheel

You can Select Your Vehicle to check if E1GZ-1104-A fits your vehicle.

It is recommended to leave this job to a professional mechanic who has the necessary tools and expertise. Alternatively, the assembly can be taken to an automotive machine shop or qualified repair facility equipped with the required tools.

Before disassembling 2010 and earlier all-wheel drive models, measure from the center of the rear hub to the lower edge of the bodywork at the top of the wheel opening with the vehicle's full weight on the ground to establish the normal ride height.

Before disassembling 2010 and earlier all-wheel drive models, measure from the center of the rear hub to the lower edge of the bodywork at the top of the wheel opening with the vehicle's full weight on the ground to establish the normal ride height.

First, apply the parking brake and loosen the wheel lug nuts. Then, raise the front of the vehicle and securely support it on jack stands. Remove the wheel and brake disc. Next, remove the hub dust cap and nut, and push the drive axle through the hub splines while removing the hub and bearing assembly. Care should be taken not to overextend the inner CV joint. Finally, support the outer end of the drive axle with a length of wire or rope.